Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, SOR/2009-162

Section 3

Cite as Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, SOR/2009-162, s. 3 · current to July 24, 2025 · regulation last amended March 16, 2020

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Every person referred to in section 2 must control the release of hexavalent chromium compounds from each tank by one of the following methods: (a) using a point source in accordance with sections 4 to 6; (b) limiting the surface tension of the solution in the tank in accordance with section 7; or (c) using a tank cover in accordance with sections 8 to 10. (2) The person must, for each facility, submit a notice to the Minister indicating, for each tank, the method used to control the release of hexavalent chromium compounds, (a) in the case of a facility at which chromium electroplating, chromium anodizing or reverse etching is carried out on the coming into force of this section, within 30 days after the day on which this section comes into force; and (b) in any other case, at least 30 days before beginning to carry out any of those activities. (3) If the release of hexavalent chromium compounds from a tank is controlled by limiting the surface tension of the solution, the notice must state whether a tensiometer or a stalagmometer is or will be used to measure surface tension. (4) Every person that intends to change either the method of controlling the release of hexavalent chromium compounds from a tank or the surface tension measurement method for a tank must notify the Minister of that intention at least 30 days before the day on which the change is to be implemented.
Read the Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.