Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, SOR/2009-162

Section 12

Cite as Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, SOR/2009-162, s. 12 · current to July 24, 2025 · regulation last amended March 16, 2020

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

For the purposes of paragraph 95(1)(a) of the Act, where there occurs or is a likelihood of a release into the environment of a hexavalent chromium compound in contravention of these Regulations, the written report must contain the following information: (a) the name, civic address and telephone number of the person submitting the report; (b) the civic address of the facility where the release occurred or is likely to occur; (c) in the case of a release, the date, time, duration and exact location of the release; (d) in the case of the likelihood of a release, the date, time and location where the release is likely to occur; (e) the estimated quantity of hexavalent chromium compound that was released or is likely to be released; (f) a description of the circumstances leading to the release or likely release, including identification of its cause, if known, and any corrective action taken; (g) a description of measures taken to remedy, reduce or mitigate any danger that results from the release or that may reasonably be expected to result if the release were to occur; and (h) the identification of all persons and agencies notified as a result of the release or likely release.
Read the Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.