Weights and Measures Regulations, C.R.C., c. 1605

Section 269

Cite as Weights and Measures Regulations, C.R.C., c. 1605, s. 269 · current to July 24, 2025 · regulation last amended September 20, 2024

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Subject to subsection (4), the limits of error set out in the tables to subsections (2) and (3) apply to all slow-flow meters rated at 115 litres per hour or less or 25 gallons per hour or less for use in trade in pipeline systems to measure fuel oil, stove oil or kerosene supplied to furnaces and other heating equipment, or in any other system where the meter is permanently connected to a point of fuel consumption. (2) The limits of error set out in the following table apply to meters designed to operate at 2.25 to 22.5 litres or more per hour or 0.5 to five gallons or more per hour:TABLEColumn IColumn IIColumn IIIItemKnown Test QuantityAcceptance Limits of ErrorIn-Service Limits of Error1Any volume above the minimum volume set out in specifications established by the Minister for slow-flow meters or for a design of slow-flow meter½% of known test quantity¾% of known test quantity (3) The limits of error set out in the following table apply to meters designed to operate at 0.10 to 3.4 litres or more per hour or 0.02 to 0.75 gallons or more per hour:TABLEColumn IColumn IIColumn IIIItemKnown Test QuantityAcceptance Limits of ErrorIn-Service Limits of Error1Any volume above the minimum volume set out in specifications established by the Minister for slow-flow meters or for a design of slow-flow meter (during tests made at 0.5 litres per hour or 0.10 gallons per hour)3% of known test quantity4% of known test quantity2Any volume above the minimum volume set out in specifications established by the Minister for slow-flow meters or for a design of slow-flow meter (during tests made at 3.4 litres per hour or 0.75 gallons per hour)½% of known test quantity¾% of known test quantity (4) The limits of error set out in the tables to subsections (2) and (3) refer to the results of bench tests made in accordance with specifications established by the Minister for slow-flow meters.
Read the Weights and Measures Regulations on the Justice Laws Website ↗

Made under Weights and Measures Act, R.S.C. 1985, c. W-6.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.