Precious Metals Marking Regulations, C.R.C., c. 1303
Section 9
Cite as Precious Metals Marking Regulations, C.R.C., c. 1303, s. 9 · current to July 24, 2025 · regulation last amended June 17, 2019
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) A quality mark specified in Column I of an item of the table to this section may be applied to a bracelet watch case if
(a) in respect of a quality mark specified in Column I of item 1 or 2 of the table, a sheet of gold that is at least 10 karats in quality is soldered or brazed,
(b) in respect of a quality mark specified in Column I of item 3 of the table, a sheet of silver that is at least 925 parts by weight per 1,000 parts pure silver in quality is soldered or brazed,
(c) in respect of a quality mark specified in Column I of item 4 of the table, gold that is at least 10 karats in quality is plated by any means, or
(d) in respect of a quality mark specified in Column I of item 5 of the table, silver that is at least 925 parts by weight per 1,000 parts pure silver in quality is plated by any meansto at least the thickness specified in Column II of that item to the entire outer surface of the bezel, the centre, if any, the lugs and the back of the watch case.
(2) Where only
(a) the bezel, centre and lugs, or
(b) the bezelof a bracelet watch case are plated as described in subsection (1), a quality mark specified in Column I of an item of the table to this section may be applied to the case if it is stamped, branded, engraved or imprinted in the location and accompanied by the words specified in Column III or IV of that item, whichever is applicable.
(3) Where a quality mark specified in Column I of item 4 or 5 of the table to this section is applied to a bracelet watch case plated with gold or silver respectively to a thickness of at least five micrometres, a statement of the thickness of the gold or silver expressed as a whole numeral and followed immediately by the word “micrometres”, or the symbol “vm” therefor, may be applied to the watch case in conjunction with the quality mark.TABLEColumn IColumn IIColumn IIIColumn IVItemQuality MarkMinimum Thickness of Gold or SilverLocation of mark and words to accompany it where the plated components are: bezel, centre (if any) and lugs onlyBezel only1“gold filled”, “G.F.” or “doublé d’or” together with the quality of the gold expressed in karats or decimals in characters of the same size as those employed in the quality mark75 micrometresOn the outer surface of the bezel and centre with the words “base metal back” or “fond en métal commun” or the name of the base metal and the word “back” or “fond” on the outer surface of the back of the case, or on the outer or inner surface of the back together with the words “base metal back” or “fond en métal commun” or the name of the base metal and the word “back” or “fond”On the outer surface of the bezel with the words “base metal” or “métal commun” or the name of the base metal on the outer surface of the back of the case, or on the outer or inner surface of the back together with the words “bezel” or “biseau” and “base metal” or “métal commun” or the name of the base metal2“rolled gold plate”, “R.G.P.” or “plaqué d’or laminé ” together with the quality of the gold expressed in karats or decimals in characters of the same size as those employed in the quality mark35 micrometresIdemIdem3“silver filled”, “S.F.”, “doublé d’argent”75 micrometresIdemIdem4“gold electro-plate”, “gold plated”, “G.E.P.”, “electroplaqué d’or”, or “or plaqué”5 micrometresIdemIdem5“Silver electro-plate”, “silver plate”, “silver plated”, “electro-plaqué d’argent”, “plaqué d’argent” or any abbreviation for any of the foregoing5 micrometresIdemIdem
Read the Precious Metals Marking Regulations on the Justice Laws Website ↗
Made under Precious Metals Marking Act, R.S.C. 1985, c. P-19.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.