Precious Metals Marking Regulations, C.R.C., c. 1303
Section 10
Cite as Precious Metals Marking Regulations, C.R.C., c. 1303, s. 10 · current to July 24, 2025 · regulation last amended June 17, 2019
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) A quality mark specified in Column I of an item of the table to this section may be applied to a spectacle frame that
(a) is plated with gold of at least 10 karats in quality, and
(b) meets the requirements specified in Columns II and III of that itemby stamping, branding, engraving or imprinting it on the frame front and at least one temple of the frame.
(2) Where a quality mark specified in Column I of item 1 or 2 of the table to this section is applied to a spectacle frame,
(a) a fraction showing the ratio of the weight of the gold in the frame to the gross weight of the frame, and
(b) a statement of the quality of the gold expressed in karats or decimalsmay be applied immediately preceding the quality mark.
(3) All numerals and characters expressing fractions or statements of quality authorized to be applied to an article by subsection (2) shall be of equal size and not larger than the quality mark referred to in subsection (1).
(4) Where a quality mark specified in Column I of item 3 of the table to this section is applied to a spectacle frame plated with gold to a thickness of at least one micrometre, a statement of the thickness of the gold expressed as a whole numeral and followed immediately by the word “micrometre”, or the symbol “vm” therefor, may be applied to the frame in conjunction with the quality mark.TABLEColumn IColumn IIColumn IIIQuality MarkQuantity Precious Metal in the ArticleMethod of Plating1“gold filled”, “G.F.” or “doublé d’or”Gold in plating 1/20, or such larger fraction as may be represented, of the gross weight of the entire article multiplied by(a) the quality of the gold, where represented in karats or decimals; or(b) 0.416 where no representation in karats or decimals is made.Sheet of gold soldered or sweated2“rolled plate”, “R.P.”, “rolled gold plate”, “R.G.P.”, “placage laminé” or “plaqué d’or laminé”Gold in plating less than 1/20, or such smaller fraction as may be represented, of the gross weight of the entire article multiplied by(a) the quality of the gold, where represented in karats or decimals; or(b) 0.416 where no representation in karats or decimals is made.Sheet of gold soldered or sweated3“gilt”, “gold plated”, “G.E.P.”, “doré” or “or plaqué”Any means
Read the Precious Metals Marking Regulations on the Justice Laws Website ↗
Made under Precious Metals Marking Act, R.S.C. 1985, c. P-19.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.