Liquefied Petroleum Gases Bulk Storage Regulations, C.R.C., c. 1152

Section 24

Cite as Liquefied Petroleum Gases Bulk Storage Regulations, C.R.C., c. 1152, s. 24 · current to July 24, 2025 · regulation last amended June 18, 2015

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Storage tanks shall be constructed in accordance with the 1956, 1959 or 1962 issue of the A.S.M.E. Boiler and Pressure Vessel Code for Unfired Pressure Vessels to a design working pressure not less than 125 per cent of the vapour pressure of the liquefied petroleum gas at 100°F, but not less than 250 psig for liquefied propane. The factor of safety shall not be less than 4. (2) The tank design drawings and specifications shall be approved by the Pressure Vessel Inspection Branch of the provincial government concerned prior to fabrication of the tank. (3) Tank design drawings and specifications shall be in accordance with the requirements of Canadian Standards Association Pamphlet B-51. (4) Welding to any parts of a tank subject to internal pressure shall be in accordance with the code under which the tank was fabricated. Non-code welding is permitted only on saddle plates, lugs or brackets attached to the container by the tank manufacturer.
Read the Liquefied Petroleum Gases Bulk Storage Regulations on the Justice Laws Website ↗

Made under Railway Safety Act, R.S.C. 1985, c. 32 (4th Supp.).

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.