2016-00944: Airworthiness Directives; Airbus Airplanes

Summary

We propose to supersede Airworthiness Directive (AD) 2015-10- 03, for certain Airbus Model A330-200 and -300 series airplanes, and Model A340-200 and -300 series airplanes. AD 2015-10-03 currently requires a detailed inspection for visible chrome of each affected main landing gear (MLG) sidestay upper cardan pin, associated nuts, and retainer assembly; pin replacement if needed; measurement of cardan pin clearance dimensions (gap check); corrective actions if necessary; and a report of all findings. Since we issued AD 2015-10-03, further investigation concluded that the reported MLG sidestay upper cardan pin migration event had been caused by corrosion due to lack of jointing compound and inadequate sealant application during the MLG installation. This proposed AD would require a detailed inspection of the upper cardan pin and nut threads for any corrosion, pitting, or thread damage, and if necessary, replacement of the cardan pin and nut threads. This proposed AD would also revise the applicability to include additional airplane models. We are proposing this AD to detect and correct migration of the sidestay upper cardan pin, which could result in disconnection of the sidestay upper arm from the airplane structure, and could result in a landing gear collapse and consequent damage to the airplane and injury to occupants.

The agency’s own summary, as published.

What this changes

Amends 1 part of the Code of Federal Regulations — the standing rules this notice rewrites.

• 14 CFR 39 Airworthiness Directives