2016-04681: Airworthiness Directives; The Boeing Company Airplanes

Summary

We are revising an earlier proposed airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747- 400F, 747SR, and 747SP series airplanes. The notice of proposed rulemaking (NPRM) proposed to require replacing the wire bundles inside the electrical conduit of the forward and aft boost pumps of the numbers 1 and 4 main fuel tanks with new, improved wire bundles inserted into conduit liners. The NPRM was prompted by several reports of chafing of the wire bundles inside the electrical conduit of the forward and aft boost pumps of the numbers 1 and 4 main fuel tanks due to high vibration. These wire bundles can chafe through the wire sleeving into the insulation, exposing the wire conductors. This action revises the NPRM by adding a revision to the maintenance or inspection program, as applicable, to include critical design configuration control limitations (CDCCL) for the fuel boost pump wiring. We are proposing this SNPRM to prevent chafing of the wire bundles and subsequent arcing between the wiring and the electrical conduit creating an ignition source in the fuel tanks, which could result in a fire and consequent fuel tank explosion. Since these actions impose an additional burden over that proposed in the NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.

The agency’s own summary, as published.

What this changes

Amends 1 part of the Code of Federal Regulations — the standing rules this notice rewrites.

• 14 CFR 39 Airworthiness Directives