Transportation Department Docket FAA-2022-0384 Proposed Rule

2022-07013: Airworthiness Directives; Pratt & Whitney Turbofan Engines

Comment Period Closed

Public comment closed .

Get alerted when the next rule lands

New rules open for comment on their own schedule. Pick how you want to hear about them — we email you when one appears.

Alert me on new Transportation Department rules or alert me on a subject

Publishing to members? Embed a live rule tracker on your own site — the proposed rules in your area and the comment deadlines closing on them, updating themselves. Free, one line of HTML.

Create a free account & build one →

Summary

The FAA proposes to supersede Airworthiness Directive (AD) 2021-14-06, which applies to all Pratt & Whitney (PW) PW1519G, PW1521G, PW1521G-3, PW1521GA, PW1524G, PW1524G-3, PW1525G, PW1525G-3, PW1919G, PW1921G, PW1922G, PW1923G, and PW1923G-A model turbofan engines. AD 2021-14-06 requires repetitive borescope inspections (BSI) of certain low-pressure compressor (LPC) rotor 1 (R1) until replacement of electronic engine control (EEC) full authority digital electronic control (FADEC) software with updated software. AD 2021-14-06 also requires a BSI after installation of the updated EEC FADEC software if certain Onboard Maintenance Message fault codes are displayed and meet specified criteria. AD 2021-14-06 also requires, depending on the results of the BSI, replacement of the LPC R1. Since the FAA issued AD 2021-14-06, the manufacturer redesigned the compressor intermediate case (CIC) assembly to incorporate a shortened bleed duct configuration and updated the EEC FADEC software. This proposed AD would continue to require repetitive BSI of certain LPC R1s until replacement of EEC FADEC software with updated software and also a BSI after installation of the updated EEC FADEC software if certain Onboard Maintenance Message fault codes are displayed and meet specified criteria. This proposed AD would continue to require, depending on the results of the BSI, replacement of the LPC R1. This proposed AD would also require removal and replacement of the existing CIC assembly with a CIC assembly eligible for installation. The FAA is proposing this AD to address the unsafe condition on these products.

The agency’s own summary, as published.

What this changes

Amends 1 part of the Code of Federal Regulations — the standing rules this notice rewrites.

Don't miss the comment window

One Click Politics alerts you on every deadline, hearing, and rule change.

See all rules with comments due soon →