2022-25016: Airworthiness Directives; Pratt & Whitney Canada Corp. Turbofan Engines
Public comment closed .
Get alerted when the next rule lands
New rules open for comment on their own schedule. Pick how you want to hear about them — we email you when one appears.
Publishing to members? Embed a live rule tracker on your own site — the proposed rules in your area and the comment deadlines closing on them, updating themselves. Free, one line of HTML.
Create a free account & build one →Summary
The FAA proposes to supersede Airworthiness Directive (AD) 2004-04-09, which applies to certain Pratt & Whitney Canada Corp. (P&WC) JT15D-1, JT15D-1A, and JT15D-1B model turbofan engines. AD 2004- 04-09 requires a one-time borescope inspection (BSI) of the rear face of certain impellers for evidence of a machined groove or step, and repair or replacement of the impeller if a groove or step is found. Since the FAA issued AD 2004-04-09, the FAA was notified of an uncontained failure of an impeller installed on a P&WC JT15D-1A engine during takeoff and subsequent investigation by the manufacturer that discovered machining marks on the impeller. This proposed AD would require borescope fluorescent penetrant inspection (FPI) of the rear face of certain impellers for evidence of machining witness lines and, depending on the results of the inspection, replacement of the impeller, as specified in a Transport Canada AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
The agency’s own summary, as published.
What this changes
Amends 1 part of the Code of Federal Regulations — the standing rules this notice rewrites.
Rulemaking docket
We haven’t pulled this rulemaking’s full docket yet. View docket FAA-2022-1478 on Regulations.gov →
Don't miss the comment window
One Click Politics alerts you on every deadline, hearing, and rule change.
See all rules with comments due soon →