2016-00949: Airworthiness Directives; Airbus Airplanes
Get alerted when the next rule lands
New rules open for comment on their own schedule. Pick how you want to hear about them — we email you when one appears.
Publishing to members? Embed a live rule tracker on your own site — the proposed rules in your area and the comment deadlines closing on them, updating themselves. Free, one line of HTML.
Create a free account & build one →Summary
We are superseding Airworthiness Directive (AD) 96-18-06 for certain Airbus Model A320-211 and -231 airplanes. AD 96-18-06 required visual inspections to detect cracks of the pressurized floor fittings at frame 36, and renewal of the zone protective finish or replacement of fittings with new fittings if necessary. Since we issued AD 96-18- 06, an extended service goal analysis by the manufacturer revealed that the compliance times and repetitive inspection intervals should be reduced to meet the design service goal. This AD retains the requirements of AD 96-18-06, with reduced compliance times and repetitive inspection intervals. This AD also adds Model A320-212 airplanes to the applicability. We are issuing this AD to detect and correct fatigue cracking in the pressurized floor fittings at frame 36, which could result in failure of a floor fitting and subsequent depressurization of the fuselage.
The agency’s own summary, as published.
What this changes
Amends 1 part of the Code of Federal Regulations — the standing rules this notice rewrites.
Rulemaking docket
We haven’t pulled this rulemaking’s full docket yet. View docket FAA-2015-1427 on Regulations.gov →
Don't miss the comment window
One Click Politics alerts you on every deadline, hearing, and rule change.
See all rules with comments due soon →