2015-32519: Airworthiness Directives; Airbus Airplanes
Get alerted when the next rule lands
New rules open for comment on their own schedule. Pick how you want to hear about them — we email you when one appears.
Publishing to members? Embed a live rule tracker on your own site — the proposed rules in your area and the comment deadlines closing on them, updating themselves. Free, one line of HTML.
Create a free account & build one →Summary
We are superseding Airworthiness Directive (AD) 2004-14-09 for certain Airbus Model A320-211, -212, and -231 airplanes. AD 2004-14-09 required repetitive inspections for fatigue cracking of the lower surface panel on the wing center box, and repair if necessary; and modification of the lower surface panel on the wing center box, which constitutes terminating action for the repetitive inspections. This new AD retains the requirements of AD 2004-14-09, reduces the compliance times for the repetitive inspections, and requires an additional repair for certain airplanes. This AD was prompted by a determination that, based on the average flight duration, the average weight of fuel at landing is higher than that defined for the analysis of the fatigue-related tasks; and that shot peening might have been improperly done on the chromic acid anodizing (CAA) protection, which would adversely affect fatigue crack protection. We are issuing this AD to detect and correct fatigue cracking of the lower surface panel on the wing center box, which could result in reduced structural integrity of the airplane.
The agency’s own summary, as published.
What this changes
Amends 1 part of the Code of Federal Regulations — the standing rules this notice rewrites.
Rulemaking docket
We haven’t pulled this rulemaking’s full docket yet. View docket FAA-2015-1275 on Regulations.gov →
Don't miss the comment window
One Click Politics alerts you on every deadline, hearing, and rule change.
See all rules with comments due soon →