2016-05249: Airworthiness Directives; The Boeing Company Airplanes

Summary

We are superseding Airworthiness Directive (AD) 2012-15-13, for certain The Boeing Company Model 747-100B SUD, 747-300, 747-400, and 747-400D series airplanes; and Model 747-200B series airplanes having a stretched upper deck. AD 2012-15-13 required inspections for cracking and discrepancies of certain fasteners; modification of the frame-to-tension-tie joints; repetitive post-modification inspections; related investigative and corrective actions if necessary; and repetitive inspections for cracking in the tension tie channels, and repair if necessary. For certain airplanes, AD 2012-15-13 also required an inspection to determine if the angle is installed correctly, and re- installation if necessary; and an inspection at the fastener locations where the tension tie previously attached to the frame prior to certain modifications, and repair if necessary. This new AD adds a new inspection for cracking in the tension tie channels and post- modification inspections of the modified tension ties for cracking, and repair if necessary. This AD was prompted by an evaluation indicated that the upper deck is subject to widespread fatigue damage (WFD). We are issuing this AD to prevent fatigue cracking of the tension ties, shear webs, and frames of the upper deck, which could result in rapid decompression and reduced structural integrity of the airplane.

The agency’s own summary, as published.

What this changes

Amends 1 part of the Code of Federal Regulations — the standing rules this notice rewrites.

• 14 CFR 39 Airworthiness Directives