2016-12331: Airworthiness Directives; The Boeing Company Airplanes
Get alerted when the next rule lands
New rules open for comment on their own schedule. Pick how you want to hear about them — we email you when one appears.
Publishing to members? Embed a live rule tracker on your own site — the proposed rules in your area and the comment deadlines closing on them, updating themselves. Free, one line of HTML.
Create a free account & build one →Summary
We are superseding Airworthiness Directive (AD) 2005-18-18 for certain The Boeing Company Model 757 airplanes. AD 2005-18-18 required inspections of certain wire bundles in the left and right engine-to- wing aft fairings for discrepancies; installation of back-to-back p- clamps between the wire and hydraulic supply tube at the aft end of the right-hand strut only; and associated re-routing of the wire bundles, if necessary. This new AD also requires an installation of spiral cable wrap on fuel shutoff valve (FSV) wires at the aft end of the strut, for both left and right engines, and related investigative and corrective actions. This AD was prompted by a determination that the service information referenced in AD 2005-18-18 did not adequately address FSV wires at the aft end of the struts. We are issuing this AD to prevent chafing between the wire bundle and the structure of the aft fairing, which could result in electrical arcing and subsequent ignition of flammable vapors and a possible uncontrollable fire.
The agency’s own summary, as published.
What this changes
Amends 1 part of the Code of Federal Regulations — the standing rules this notice rewrites.
Rulemaking docket
We haven’t pulled this rulemaking’s full docket yet. View docket FAA-2015-0496 on Regulations.gov →
Don't miss the comment window
One Click Politics alerts you on every deadline, hearing, and rule change.
See all rules with comments due soon →