2016-22707: Airworthiness Directives; The Boeing Company Airplanes
Get alerted when the next rule lands
New rules open for comment on their own schedule. Pick how you want to hear about them — we email you when one appears.
Publishing to members? Embed a live rule tracker on your own site — the proposed rules in your area and the comment deadlines closing on them, updating themselves. Free, one line of HTML.
Create a free account & build one →Summary
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-400, 747-400D, and 747-400F series airplanes. This AD was prompted by a determination that a certain fastener type in the fuel tank walls has insufficient bond to the structure, and an electrical wiring short could cause arcing to occur at the ends of fasteners in the fuel tanks. This AD requires the installation of new clamps and polytetrafluoroethylene (TFE) sleeves on the wire bundles of the front spars and rear spars of the wings. This AD also requires inspecting the existing TFE sleeves under the wire bundle clamps for correct installation, and replacement if necessary. We are issuing this AD to prevent potential ignition sources in the fuel tank in the event of a lightning strike or high-powered short circuit, and consequent fire or explosion.
The agency’s own summary, as published.
What this changes
Amends 1 part of the Code of Federal Regulations — the standing rules this notice rewrites.
Rulemaking docket
We haven’t pulled this rulemaking’s full docket yet. View docket FAA-2016-3986 on Regulations.gov →
Don't miss the comment window
One Click Politics alerts you on every deadline, hearing, and rule change.
See all rules with comments due soon →