B.C. Reg. 170/2025: Amendments to the Administrative Penalties (Environmental Management Act) Regulation and 2 others
Made under the Environmental Management Act
How does this rule affect your organization? One Click reads it against your profile and tells you, on Canada Federal Legislative Tracking. See plans →
Get alerted when the next rule lands
New rules land on their own schedule. Pick how you want to hear about them — we email you when one appears.
Publishing to members? Embed a live rule tracker on your own site — the proposed rules in your area and the comment deadlines closing on them, updating themselves. Free, one line of HTML.
The rule, in full
2,957 words as published, November 04, 2025. View the original →
B.C. Reg. 170/2025, deposited October 27, 2025, under the ENVIRONMENTAL MANAGEMENT ACT [sections 21, 115, 138 and 139]. Order in Council 476/2025, approved and ordered October 27, 2025. On the recommendation of the undersigned, the Lieutenant Governor, by and with the advice and consent of the Executive Council, orders that, effective November 21, 2025, (a) the Administrative Penalties (Environmental Management Act) Regulation, B.C. Reg. 133/2014, is amended as set out in the attached Appendix 1, (b) the Hazardous Waste Regulation, B.C. Reg. 63/88, is amended as set out in the attached Appendix 2, and (c) the Recycling Regulation, B.C. Reg. 449/2004, is amended as set out in the attached Appendix 3. — T. DAVIDSON, Minister of Environment and Parks; S. MALCOLMSON, Presiding Member of the Executive Council.
Appendix 1
1 Section 36 of the Administrative Penalties (Environmental Management Act) Regulation, B.C. Reg. 133/2014, is amended (a) in subsection (1) (a) by striking out "section 2 (1), (2) or (3)" and substituting "section 2 (1), (2), (3) or (3.1)", and (b) in subsection (2) by striking out "9 (4)" and substituting "9 (2)".
Appendix 2
1 Section 1 (1) of the Hazardous Waste Regulation, B.C. Reg. 63/88, is amended by repealing the definition of "e-waste" and substituting the following: "e-waste" means a hazardous waste that is in any of the following product categories within the meaning of the Recycling Regulation: (a) the electronic and electrical product category; (b) the battery-containing product category; .
Appendix 3
1 Section 1 (1) of the Recycling Regulation, B.C. Reg. 449/2004, is amended (a) in the definition of "agency" by striking out "corporation" and substituting "not-for-profit corporation", (b) in the definition of "collection facility" by repealing paragraphs (b) and (c) and substituting the following: (c) in respect of a product other than a product within the beverage container product category, a collection facility established by the producer or identified in an approved plan; , (c) in the definition of "producer" by repealing paragraph (a.1) (iii) and substituting the following: (iii) imports the tire product into British Columbia in order to use in a commercial enterprise, sell, offer for sale or distribute the product in British Columbia, , (d) in the definition of "producer" by repealing paragraph (b) (iii) and substituting the following: (iii) if subparagraphs (i) and (ii) do not apply, a person who imports the product into British Columbia in order to use in a commercial enterprise, sell, offer for sale or distribute the product in British Columbia, , and (e) by repealing the definition of "product category" and substituting the following: "product category" means any of the following categories described in the Schedules: (a) automotive product category; (b) battery-containing product category; (c) beverage container product category; (d) canister product category; (e) electronic and electrical product category; (f) gasoline product category; (g) large battery product category; (h) lead-acid battery product category; (i) lubricating oil product category; (j) medical sharp product category; (k) oil filter product category; (l) packaging and paper product category; (m) paint product category; (n) pesticide product category; (o) pharmaceutical product category; (p) solvent and flammable liquids product category; (q) tire product category; . 2 Section 1 is amended by adding the following subsection: (4) For the purposes of the definition of "producer", a person sells a product or offers a product for sale if the person sells the product or offers the product for sale by any means, including the following: (a) online; (b) by phone; (c) by mail. 3 Section 2 (3) is repealed and the following substituted: (3) An agency that proposes to carry out duties under Part 2 on behalf of a producer must confirm in writing to a director the duties that the agency will perform on behalf of the producer (a) before it begins to carry out the duties, and (b) at any time on the request of the director. (3.1) An agency that carries out duties under Part 2 on behalf of a producer must comply with Part 2 in respect of the duties. 4 Section 3 is repealed and the following substituted:
Application
3 (1) Subject to subsection (2), this Part applies to a producer (a) that uses in a commercial enterprise, sells, offers for sale or distributes in British Columbia a product within a product category other than the electronic and electrical product category, or (b) that uses in a commercial enterprise, sells, offers for sale or distributes in British Columbia a product within the electronic and electrical product category and that wishes to be covered by this Part. (2) This Part does not apply to a small producer in respect of a product in the packaging and paper product category. 5 Section 3.1 is repealed. 6 Section 5 (1) is amended (a) in paragraph (a) (i) (B) by striking out "other than the beverage container product category" and substituting "other than the beverage container product category and the large battery product category", and (b) in paragraph (b) by striking out "stakeholders" and substituting "interested parties and the public" and by striking out "stakeholder input" and substituting "input from interested parties and the public". 7 Section 9 is repealed and the following substituted:
Application of extended producer responsibility requirements
9 (1) A producer must meet the requirements of this Part in respect of a product in the electronic and electrical product category unless there is an approved plan for the product. (2) A producer must notify a director in writing of the producer’s intention to meet the requirements of this Part. 8 Schedule 2 is amended (a) by repealing sections 1 and 7, (b) in sections 2 (c), 3 (1), 4, 5 (2) (b) and 9 (a) by striking out "empty containers" and substituting "containers", (c) in section 6 by striking out "and" at the end of paragraph (a), adding ", and" at the end of paragraph (b) and adding the following paragraph: (c) containers with a capacity of 30 litres or less for the products described in paragraphs (a) and (b). , (d) by repealing section 9 (b) and substituting the following: (b) paints and stains, whether coloured or clear, sold in aerosol canisters, including the aerosol canisters for any of these but not including unpressurized coatings formulated for industrial, automotive or marine anti-fouling applications. , (e) by repealing section 10 and substituting the following:
Lead-acid battery product category
10 The lead-acid battery product category consists of lead-acid batteries weighing more than 2 kg. , (f) by repealing section 11 and substituting the following:
Automotive product category
11 (1) The automotive product category consists of (a) automotive antifreeze, (b) automotive fluids, gels, greases, waxes, creams and aerosols designed for use in the maintenance or repair of a motor vehicle, including the following: (i) diesel exhaust fluid; (ii) windshield washer fluid; (iii) brake fluid; (iv) lubricants; (v) stabilizers; (vi) sealants; (vii) sealers; (viii) engine conditioners; (ix) boosters; (x) solvents; (xi) degreasers; (xii) fuel system cleaners, and (c) containers, with a capacity of no more than 210 litres, for any of the products described in paragraphs (a) and (b). (2) The automotive product category does not include products designed for use in the cleaning or aesthetic maintenance of the interior surfaces, upholstery or exterior surfaces of a motor vehicle.
Transition – automotive product category
11.1 (1) This section applies in relation to the following: (a) products described in section 11 (1) (b); (b) containers, with a capacity of no more than 210 litres, for any of the products described in section 11 (1) (b). (2) Despite section 2 (1), a person who, on November 21, 2025, is a producer of a product referred to in subsection (1) (a) is not required to submit an extended producer responsibility plan in accordance with section 4 [submission of extended producer responsibility plan] of this regulation until June 30, 2026, if the person continues to be a producer on that date, and (b) is not required to have an approved plan under Part 2 [Extended Producer Responsibility Plans] of this regulation until February 1, 2027, if the person continues to be a producer on that date. , and (g) by adding the following sections:
Canister product category
14 (1) The canister product category consists of (a) the following types of canisters: (i) pressurized non-refillable canisters, including the following: (A) aerosol canisters; (B) bear spray canisters and other canisters containing animal deterrent agents; (C) fuel canisters; (D) helium canisters; (E) canisters containing sealants or adhesives; (F) canisters containing cleaning agents; (G) canisters designed to be punctured during use; (ii) canisters containing carbon dioxide designed primarily for use in residential premises for beverage carbonation; (iii) low-pressure spray foam canisters for construction use; (iv) handheld fire extinguishers; (v) portable propane cylinders with a water capacity of no more than 109 litres, other than portable propane cylinders designed primarily for use with propane-powered forklifts, and (b) the contents of the canisters described in paragraph (a). (2) The canister product category does not include the following canisters or their contents: (a) canisters containing the products, substances or organisms included in the following classes listed in the Schedule to the Transportation of Dangerous Goods Act, 1992 (Canada): (i) Class 1 – Explosives; (ii) Class 6 – Poisonous (toxic) and infectious substances; (iii) Class 7 – Nuclear substances that are radioactive; (b) canisters designed for police or military use; (c) canisters designed to be used exclusively in an institutional, industrial or laboratory setting.
Transition – canister product category
15 Despite section 2 (1), a person who, on November 21, 2025, is a producer of a product within the canister product category (a) is not required to submit an extended producer responsibility plan in accordance with section 4 [submission of extended producer responsibility plan] of this regulation until June 30, 2026, if the person continues to be a producer on that date, and (b) is not required to have an approved plan under Part 2 [Extended Producer Responsibility Plans] of this regulation until April 1, 2027, if the person continues to be a producer on that date.
Medical sharp product category
16 (1) The medical sharp product category consists of the following: (a) needles, safety engineered needles, lancets and other similar instruments designed to puncture, for medical purposes, the skin of a person, pet, service dog or guide dog; (b) anything affixed or designed to be affixed to an instrument described in paragraph (a), including a syringe. (2) The medical sharp product category does not include medical sharps administered to a person, pet, service dog or guide dog if the medical sharps are administered at premises other than residential premises (a) by a person providing care to that person, pet, service dog or guide dog, or (b) by a person for remuneration.
Return of medical sharp product
17 A collection facility is not required to accept a product in the medical sharp product category if the product is not delivered to the facility in a medical sharp container.
Transition – medical sharp product category
18 Despite section 2 (1), a person who, on November 21, 2025, is a producer of a product within the medical sharp product category (a) is not required to submit an extended producer responsibility plan in accordance with section 4 [submission of extended producer responsibility plan] of this regulation until October 1, 2026, if the person continues to be a producer on that date, and (b) is not required to have an approved plan under Part 2 [Extended Producer Responsibility Plans] of this regulation until June 30, 2027, if the person continues to be a producer on that date. 9 Schedule 3 is amended (a) by repealing the title and substituting the following:
Electronic, Electrical and Battery-Containing Product Categories ,
(b) in section 2 (1) by striking out ", without limitation," wherever it appears, (c) by repealing section 2 (1) (g) and substituting the following: (g) sports equipment with electronic or electrical components, including the following: (i) biking, diving, running and rowing machines or computers; (ii) bicycles, unicycles, scooters and skateboards; , (d) by repealing section 2 (1) (k), (l) and (m) and substituting the following: (k) electronic or electrical medical devices or equipment for detecting, preventing, monitoring, treating or alleviating illness, injury or disability, other than the following: (i) a medical device that has been implanted into a person; (ii) a medical device that has been exposed to infectious matter; (iii) a medical device, or medical equipment, designed to be used exclusively in a health care facility; (l) electronic or electrical decorations and signs designed for residential or business use, other than products whose installation requires the use of professional services; (m) accessories, including cables, adapters, connection cords, extension power cords, power bars, chargers and printer cartridges, that could be used with an electronic or electrical product listed in this subsection; (n) batteries, including primary batteries and rechargeable batteries, that could be used in or with an electronic or electrical product listed in this subsection. , (e) by repealing section 2 (2) and substituting the following: (2) The electronic and electrical product category does not include computers and televisions that are part of or attached to any of the following: (a) a motor vehicle; (b) a marine vessel; (c) commercial equipment that is not a product described in subsection (1); (d) industrial equipment that is not a product described in subsection (1). , and (f) by adding the following sections:
Transition – electronic and electrical product category
4 Despite section 2 (1), a person who, on November 21, 2025, is a producer of a product described in section 2 (1) (l) or (m) of this Schedule that was not described in that subsection immediately before this section comes into force (a) is not required to submit an extended producer responsibility plan in respect of that product in accordance with section 4 [submission of extended producer responsibility plan] of this regulation until December 15, 2026, if the person continues to be a producer on that date, and (b) is not required to have, in respect of that product, an approved plan under Part 2 [Extended Producer Responsibility Plans] of this regulation until August 1, 2027, if the person continues to be a producer on that date.
Battery-containing product category
5 (1) The battery-containing product category consists of the following products: (a) products, including the following, that are designed primarily for residential, business or recreational use and that contain or require the use of one or more batteries weighing no more than 5 kg each: (i) clothing, footwear and hats and other wearable accessories; (ii) promotional and marketing products; (iii) party supplies; (iv) greeting cards; (v) food containers; (vi) locks and lockboxes; (vii) luggage and backpacks; (viii) jewelry; (ix) electronic cigarettes and vapes; (x) pet collars and pet feeders; (b) batteries, including primary batteries and rechargeable batteries, weighing no more than 5 kg and that could be used in or with a product described in paragraph (a); (c) portable battery-containing products, including the following, that are designed primarily to provide an external power source: (i) devices designed to start an engine; (ii) generators; (iii) power packs; (iv) power stations; (v) uninterruptable power supply products; (d) batteries, including primary batteries and rechargeable batteries, that could be used in or with a product described in paragraph (c); (e) accessories, including cables, adapters, connection cords, extension power cords, power bars and chargers, that could be used with a battery-containing product listed in this subsection. (2) The battery-containing product category does not include any of the following: (a) motor vehicles, boats and aircraft; (b) firearms and ammunition; (c) medical devices and equipment; (d) wheelchairs and other mobility aids; (e) products whose installation in a building or structure requires the use of professional services; (f) products designed to be used exclusively in an industrial, agricultural or military setting; (g) products described in section 2 (1) of this Schedule.
Transition – battery-containing product category
6 Despite section 2 (1), a person who, on November 21, 2025, is a producer of a product within the battery-containing product category must (a) is not required to submit an extended producer responsibility plan in accordance with section 4 [submission of extended producer responsibility plan] of this regulation until December 15, 2026, if the person continues to be a producer on that date, and (b) is not required to have an approved plan under Part 2 [Extended Producer Responsibility Plans] of this regulation until October 1, 2027, if the person continues to be a producer on that date. 10 The following Schedule is added:
Schedule 6
Large Battery Product Category
Large battery product category
1 (1) The large battery product category consists of batteries that (a) are sold or labeled as 12-volt batteries, whether or not their voltage is 12 volts, (b) have an outer case, and (c) can be connected or installed by the consumer. (2) The large battery product category does not include the following: (a) lead-acid batteries; (b) any of the products described in Schedule 3.
Transition – large battery product category
2 Despite section 2 (1), a person who, on November 21, 2025, is a producer of a product within the large battery product category must (a) is not required to submit an extended producer responsibility plan in accordance with section 4 [submission of extended producer responsibility plan] of this regulation until March 31, 2027, if the person continues to be a producer on that date, and (b) is not required to have an approved plan under Part 2 [Extended Producer Responsibility Plans] of this regulation, and comply with the approved plan, until October 1, 2027, if the person continues to be a producer on that date.
Documents
- The text in The British Columbia Gazette · November 04, 2025