Minister of Environment and Climate Change Strategy Regulation

B.C. Reg. 84/2023: Amendments to the Environmental Data Quality Assurance Regulation

Made under the Environmental Management Act

How does this rule affect your organization? One Click reads it against your profile and tells you, on Canada Federal Legislative Tracking. See plans →

Get alerted when the next rule lands

New rules land on their own schedule. Pick how you want to hear about them — we email you when one appears.

Publishing to members? Embed a live rule tracker on your own site — the proposed rules in your area and the comment deadlines closing on them, updating themselves. Free, one line of HTML.

The rule, in full

559 words as published, April 11, 2023. View the original →

B.C. Reg. 84/2023, deposited March 30, 2023, under the ENVIRONMENTAL MANAGEMENT ACT [section 138 (4)]. Ministerial Order M91/2023, dated March 27, 2023. I, George Heyman, Minister of Environment and Climate Change Strategy, order that the Environmental Data Quality Assurance Regulation, B.C. Reg. 301/90, is amended as set out in the attached Schedule. — G. HEYMAN, Minister of Environment and Climate Change Strategy.

Schedule

1 Section 1 of the Environmental Data Quality Assurance Regulation, B.C. Reg. 301/90, is amended (a) by adding the following definitions: "accreditation body" means a body that (a) is authorized by the ILAC to perform accreditation with respect to the standard referred to in the definition of "accredited" in this section, and (b) has, with the ILAC, entered into an agreement known as a Mutual Recognition Agreement; "accredited" means to have attained impartial and independent accreditation from an accreditation body as conforming with ISO/IEC Standard 17043, "Conformity assessment – General requirements for proficiency testing", as amended from time to time; , (b) by repealing the definitions of "CALA" and "designated analyte", (c) by repealing the definition of "directory of qualified laboratories" and substituting the following: "directory" means the directory of qualified laboratories, published by the ministry of the minister for the purposes of this regulation; , (d) by adding the following definitions: "ILAC" means the International Laboratory Accreditation Cooperation; "interlaboratory comparison study" means a comparison of the results of testing conducted by 2 or more laboratories with respect to the same or similar parameters; "ISO/IEC" means the International Organization for Standardization and the International Electrotechnical Commission; "parameter" means a chemical, biological or physical constituent with respect to which sampling, analysis and environmental monitoring is required under an authorization; , (e) by repealing the definition of "Proficiency Testing Program" and substituting the following: "proficiency testing program" means an interlaboratory comparison program (a) that is administered by an accredited proficiency testing provider, and (b) under which laboratories participating in interlaboratory comparison studies analyze reference samples and report, to the accredited proficiency testing provider, results for evaluation; , (f) in the definition of "reference sample" by striking out "one or more analytes" and substituting "one or more parameters", and (g) in the definition of "split sample" by striking out "identical analytes" and substituting "identical parameters". 2 Section 2 is amended by striking out "for the analytes" wherever it appears and substituting "for the parameters". 3 Section 5 is repealed and the following substituted:

Directory of qualified laboratories

5 (1) To become and remain listed in the directory as a qualified laboratory with respect to testing for a parameter, a laboratory must do both of the following: (a) achieve satisfactory testing performance in a proficiency testing program for the parameter, or, if a proficiency testing program is not available with respect to the parameter, either of the following, as approved by a director: (i) an interlaboratory comparison study; (ii) an analyst competency study; (b) give to the director authorization for the accredited proficiency testing provider that administers the proficiency testing program or study referred to in paragraph (a) to inform the director of all parameters with respect to which the laboratory has either (i) achieved satisfactory testing performance, or (ii) failed to maintain satisfactory testing performance. (2) A laboratory must give the authorization referred to in subsection (1) (b) in the form and manner required by the director.