B.C. Reg. 183/2019: Amendments to the Electrical Safety Regulation
Made under the Safety Standards Act
How does this rule affect your organization? One Click reads it against your profile and tells you, on Canada Federal Legislative Tracking. See plans →
Get alerted when the next rule lands
New rules land on their own schedule. Pick how you want to hear about them — we email you when one appears.
Publishing to members? Embed a live rule tracker on your own site — the proposed rules in your area and the comment deadlines closing on them, updating themselves. Free, one line of HTML.
The rule, in full
830 words as published, July 30, 2019. View the original →
B.C. Reg. 183/2019, deposited July 22, 2019, under the SAFETY STANDARDS ACT [sections 8 and 88]. Ministerial Order M258/2019, dated July 22, 2019. I, Selina Robinson, Minister of Municipal Affairs and Housing, order that, (a) the Electrical Safety Regulation, B.C. Reg. 100/2004, is amended as set out in the attached Appendix 1, and (b) effective January 1, 2020, the Electrical Safety Regulation is amended as set out in the attached Appendix 2. — S. ROBINSON, Minister of Municipal Affairs and Housing.
Appendix 1
1 The Electrical Safety Regulation, B.C. Reg. 100/2004, is amended by adding the following sections to Division 2 of Part 1:
Renewing certificates of qualification as field safety representative
10.1 (1) A certificate of qualification issued by a provincial safety manager to a field safety representative is valid until the expiry date stated on the certificate. (2) A provincial safety manager may renew a certificate of qualification only if the certificate holder applies to renew the certificate before its expiry. (3) Subject to subsection (5), a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 8 hours of continuing education; (b) passes an examination required by a provincial safety manager. (4) Subject to subsection (5), a certificate of qualification other than a Class A, B or C certificate of qualification may be renewed only if the certificate holder does one of the following: (a) completes at least 4 hours of continuing education; (b) if an examination is available for the class of certificate of qualification that is the subject of the application, passes an examination required by a provincial safety manager. (5) Despite section 3 of the Safety Standards General Regulation, if a certificate holder fails on the initial attempt to pass an examination referred to in this section, the holder's certificate of qualification may not be renewed unless the certificate holder completes the applicable number of hours of continuing education required under this section. (6) For the purposes of subsections (3) (a), (4) (a) and (5), a certificate holder must do all of the following: (a) complete continuing education that a provincial safety manager recognizes or evaluates as being relevant to the scope of the certificate; (b) complete the required number of hours of continuing education within the term of the certificate of qualification that is to be renewed; (c) provide proof, in a form and manner acceptable to a provincial safety manager, of the matters referred to in paragraphs (a) and (b) of this section.
Transition – certificates of qualification having no expiry date
10.2 (1) In this section: "application requirement" means a requirement of the Safety Standards General Regulation or of this regulation that applies with respect to a certificate of qualification of the same class as that of a transitional certificate being renewed under this section; "transitional certificate" means a certificate of qualification issued under this regulation that does not have an expiry date specified on the certificate. (2) A transitional certificate expires July 31, 2019, unless renewed in accordance with subsection (3). (3) A transitional certificate holder may apply to renew the certificate by providing to a provincial safety manager, before July 31, 2019, the following: (a) proof, acceptable to the provincial safety manager, of the applicant's identity; (b) any further information the provincial safety manager requires to evaluate the application; (c) any required fees. (4) A transitional certificate holder is exempt from meeting all application requirements other than (a) as provided under this section, and (b) those requirements, if any, imposed by a provincial safety manager. 2 Section 12 (1) is amended in the definition of "main consumer service" by striking out "the Canadian Electrical Code" and substituting "the definition of 'service, consumer' in section 0 of the B.C. Electrical Code".
Appendix 2
1 Section 20 of the Electrical Safety Regulation, B.C. Reg. 100/2004, is repealed and the following substituted:
Canadian Electrical Code adopted as B.C. Electrical Code
20 The Canadian Electrical Code, Part I, Twenty-fourth Edition, Safety Standard for Electrical Installations, Canadian Standards Association Standard C22.1-18, amended as set out in the Schedule to this regulation and including any errata, is adopted as the B.C. Electrical Code. 2 Section 22 is amended in the definition of "hazardous location" by striking out "section 18" and substituting "section 0". 3 The Schedule is amended by repealing the title and substituting the following:
Amendments for the Purposes of Adopting the Canadian Electrical Code as the B.C. Electrical Code .
4 Section 1 of the Schedule is amended (a) by striking out "the Canadian Electrical Code, Part I, Twenty-third Edition, Canadian Standards Association Standard C22.1-15" and substituting "the Canadian Electrical Code, Part I, Twenty-fourth Edition, Safety Standard for Electrical Installations, Canadian Standards Association Standard C22.1-18", (b) by repealing paragraphs (b) to (f), and (c) by adding the following paragraph: (g) in section 66 by repealing subrules 7 and 8 of rule 66-456.
Documents
- The text in The British Columbia Gazette · July 30, 2019