2026-14934: Removal of Obsolete or Unnecessary Requirements

A. Part 1203

In 1995, the Commission issued an interim mandatory Safety Standard for Bicycle Helmets in 16 CFR part 1203 to make certain voluntary standards for bicycle helmets interim mandatory standards pursuant to direction in the Children's Bicycle Helmet Safety Act of 1994 (the Act). 60 FR 15231 (Mar. 23, 1995); 15 U.S.C. 6004(a). The interim mandatory standard for bicycle helmets covers bicycle helmets manufactured from March 17, 1995, through March 10, 1999. The Act also required the Commission to promulgate a final rule that would review the requirements of the interim bicycle helmet standards and establish a final standard for bicycle helmets based on such requirements. 15 U.S.C. 6004(c). In 1998, the Commission published a final rule, part 1203, Safety Standard for Bicycle Helmets, which applies to bicycle helmets manufactured after March 10, 1999. 63 FR 11712 (Mar. 10, 1998). Because this interim standard applies only to products manufactured more than twenty-seven years ago and no longer governs the manufacture of bicycle helmets, Subpart D no longer serves an ongoing regulatory purpose. Accordingly, the Commission is removing subpart D from part 1203 as obsolete. All other requirements in part 1203 remain unchanged.

B. Parts 1401, 1402, and 1406

The Commission has issued several rules under section 27(e) of the Consumer Product Safety Act, 15 U.S.C. 2076(e), requiring manufacturers to provide performance and technical data for certain specified consumer products. Three such rules are contained in parts 1401, 1402, and 1406, which are discussed below.

1. Part 1401

In 1977, the Commission issued a final rule, part 1401, Self Pressurized Consumer Products Containing Chlorofluorocarbons, to provide consumers considering purchasing self-pressurized consumer products (mainly aerosol products) containing chlorofluorocarbons (CFCs) with the following statement: ``WARNING--Contains a chlorofluorocarbon that may harm the public health and environment by reducing ozone in the upper atmosphere.'' 42 FR 42780 (Aug. 24, 1977). The rule also contained a reporting requirement requiring manufacturers to submit performance and technical data to the Commission regarding products subject to the requirements of part 1401. 16 CFR 1401.4. The rule went into effect on February 20, 1978. The Commission issued this rule because CFCs pose a risk of depletion of the ozone in the stratosphere and the rule states that the purpose of the rule is to enable consumers to make a conscious choice of whether to use consumer products that contain CFC propellants. 16 CFR 1401.2. In 1984, the Commission revoked the reporting requirement for manufacturers to submit performance and technical data to the Commission regarding products subject to part 1401, because in the six years since the rule went into effect, most of the self-pressurized products subject to the reporting requirements no longer contained CFCs because of a U.S. Environmental Protection Agency (EPA) ban on those substances. 49 FR 28693 (July 16, 1984). The remaining requirements in part 1401 were not affected by the revocation of the reporting requirements. CFCs have been regulated by the EPA for decades (Clean Air Act, 42 U.S.C. 7671 et seq. and 40 CFR part 82; specifically, Sec. Sec. 82.4, 82.64, and 82.66) and are largely phased out globally under the international treaty the Montreal Protocol on Substances That Deplete the Ozone Layer. Part 1401 was adopted principally to advance environmental policy objectives by informing consumers about the environmental consequences of CFC propellants rather than to address a product-specific safety hazard associated with the use of the product itself. Since the rule's adoption, Congress and EPA have established a comprehensive regulatory framework governing chlorofluorocarbons, resulting in the virtual elimination of the consumer products to which part 1401 applied. Accordingly, the Commission is removing the disclosure requirements under part 1401 from the CFR, which no longer serves its original purpose and is now obsolete.

2. Parts 1402 and 1406

In 1978, the Commission issued a final rule establishing part 1402, CB Base Station Antennas, TV Antennas, and Supporting Structures, to address a significant number of electrocutions that occurred when consumers contacted overhead powerlines with CB base station and outside TV antennas while installing or removing these antennas. 43 FR 28932 (June 29, 1978). Part 1402 requires manufacturers, including importers, to provide performance and technical data in the form of warnings and instructions to consumers with these antennas and their supporting structures so that consumers can be made aware of the hazards involved and of safe ways to install or remove these antennas. Part 1402 also requires manufacturers, including importers of CB base station antennas, TV antennas, and antenna supporting structures, to provide to the Commission samples of the labels, warning statements, and instructions that will be provided to the consumer. 16 CFR 1402.4(b). In 1983, the Commission issued a final rule establishing part 1406, Coal and Wood Burning Appliances, to address fire hazards associated with inadequate information provided to consumers with these appliances regarding improper installation of appliances, insufficient clearances between the appliances and combustibles, and improper operation of the appliance. 48 FR 21898 (May 16, 1983). Part 1406 requires performance and technical data in the form of warnings and instructions to be furnished to consumers along with [[Page 46266]] written notice on the appliance regarding the installation and use of coal and wood burning appliances. Part 1406 also requires manufacturers, including importers, of coal and wood burning appliances, to provide to the Commission samples of labels, warning statements, and instructions that will be provided to the consumer along with specified rationales stating how manufactures calculated minimum necessary clearance distances to combustibles. 16 CFR 1406.5. Parts 1402 and 1406 required manufacturers, including importers, to submit performance and technical data, either for antennas and supporting structures or for coal and wood burning appliances respectively, directly to the Commission to facilitate the agency assessing compliance with those rules. However, since the adoption of parts 1402 and 1406, advances in electronic communications, information availability, and the Commission's existing statutory authorities have substantially changed how the agency obtains information needed to assess compliance. When appropriate, the Commission may obtain labels, warnings, instructions, and other supporting materials directly from manufacturers and importers pursuant to its existing authorities, including section 16(b) of the CPSA, 15 U.S.C. 2065(b). Maintaining a requirement that every manufacturer routinely submit those materials to the Commission is therefore no longer necessary to carry out the purposes of these regulations and imposes unnecessary administrative burdens on regulated entities and the agency alike. Accordingly, the Commission is removing the submission requirements in 16 CFR 1402.4(b) and 1406.5. All substantive requirements in parts 1402 and 1406 requiring the provision of warnings, instructions, and other performance and technical information to consumers remain unchanged.

3. Commission Findings for Parts 1401, 1402, and 1406

Based on the foregoing, the Commission concludes that part 1401 no longer serves its original purpose because the products to which it applied have been effectively eliminated from commerce through the comprehensive regulatory framework governing chlorofluorocarbons. Accordingly, part 1401 is obsolete and no longer necessary to protect the public from unreasonable risk of injury associated with those products and should be removed from the CFR. The Commission further finds that the submission requirements contained in sections 1402.4(b) and 1406.5 are no longer necessary to protect the public from unreasonable risk of injury associated with those products. Those provisions were adopted to facilitate the Commission's review of manufacturer compliance, but advances in information availability and the Commission's existing statutory authorities now provide more efficient means of obtaining the same information when needed. The removal of these Commission submission requirements does not affect the substantive obligations of manufacturers and importers to provide required warnings, instructions, and other performance and technical information to consumers.

A. Direct Final Rule Process

The Commission is issuing this rule as a direct final rule. Although the Administrative Procedure Act (APA; 5 U.S.C. 551-559) generally requires agencies to provide notice of a rule and an opportunity for public comment, section 553 of the APA provides an exception when the agency ``for good cause finds'' that notice and comment are ``impracticable, unnecessary, or contrary to the public interest.'' Id. 553(b)(B). The Commission has determined that part 1401 and the above-described provisions in parts 1203, 1402, and 1406, no longer serve the public interest because they are obsolete or otherwise unnecessary. Applying the ``good cause'' standard discussed above, the Commission concludes that prior notice and comment are unnecessary before repealing the rule and rules provisions in this direct final rule. In Recommendation 2024-6, the Administrative Conference of the United States (ACUS) endorses direct final rulemaking as an appropriate procedure to expedite rules that are noncontroversial and that are not expected to generate significant adverse comments. See 89 FR 106406 (Dec. 30, 2024). ACUS recommends that agencies use the direct final rule process when they act under the ``unnecessary'' prong of the good cause exemption in 5 U.S.C. 553(b)(B). 89 FR 106406, 106409. Consistent with the ACUS recommendation, the Commission is publishing this rule as a direct final rule, because CPSC does not expect any significant adverse comments. Unless CPSC receives a significant adverse comment within 30 days of this notification, the rule will become effective on September 21, 2026. In accordance with ACUS's recommendation, the Commission considers a significant adverse comment to be one where the commenter explains why the rule would be inappropriate, ``including challenges to the rule's underlying premise or approach,'' or where the commenter explains why the rule would be ineffective or unacceptable without change. Id. at 106409. If the Commission receives a significant adverse comment, the Commission will withdraw any portion of this direct final rule related to such a comment. Depending on the comment and other circumstances, the Commission may then incorporate the adverse comment into a subsequent direct final rule or publish a notice of proposed rulemaking, providing an opportunity for public comment.

B. Removal of Incorporations by Reference

Subpart D in 16 CFR part 1203 contains several standards incorporated by reference approved by the Office of the Federal Register. 16 CFR 1203.53. Because subpart D is being removed from 16 CFR part 1203, CPSC removes the following standards that have been approved for incorporation by reference in subpart D of 16 CFR part 1203: ANSI Z90.4-1984 ASTM F1447-93 ASTM F1447-94 ASTM F1446-93 ASTM F1446-94 CAN/CSA-D113.2-M89 Snell B-90 Snell B-90S Snell N-94 Snell 1995 standard for Protective Headgear for Use with Bicycles B-95

C. Regulatory Flexibility Act

The Regulatory Flexibility Act (RFA; 5 U.S.C. 601-612) generally requires agencies to review proposed and final rules for their potential economic impact on small entities, including small businesses, and prepare regulatory flexibility analyses. 5 U.S.C. 603, 604. The RFA applies to any rule that is subject to notice and comment procedures under section 553 of the APA. 5 U.S.C. 601-612. As discussed in section III.A of this preamble regarding the Direct Final Rule Process, the Commission has determined that notice and the opportunity to comment are unnecessary for this rule. Therefore, the RFA does not apply.

D. Paperwork Reduction Act

This direct final rule contains no collection of information. Therefore, clearance by the Office of Management and Budget under the Paperwork Reduction Act of 1995 (PRA) is not [[Page 46267]] required. Parts 1401 and 1402 were promulgated before passage of the PRA in 1980 and thus those information collections are not subject to the requirements of the PRA. Regarding part 1406, coal and wood burning appliances (OMB Control number 3041-0040), the agency will assess whether the burden assessment for that rule should be revised in the next scheduled update.

E. Environmental Considerations

The Commission's regulations provide for a categorical exclusion from any requirement to prepare an environmental assessment or an environmental impact statement where they ``have little or no potential for affecting the human environment.'' 16 CFR 1021.5(c)(2). This rule falls within the categorical exclusion, so no environmental assessment or environmental impact statement is required.

F. Congressional Review Act and Executive Order 12866

Pursuant to the Congressional Review Act (CRA) and Executive Order (E.O.) 12866, the Office of Management and Budget's Office of Information and Regulatory Affairs has determined that this rule does not qualify as a ``major rule,'' as defined in 5 U.S.C. 804(2), and is not a significant regulatory action as defined under section 2(f) of E.O. 12866. To comply with the CRA, CPSC will submit the required information to each House of Congress and the Comptroller General.

1. The authority citation for part 1203 continues to read as follows:

Authority: 15 U.S.C. 2056, 2058, and 6001-6006. Subpart B is also issued under 15 U.S.C. 2063. Subpart C is also issued under 15 U.S.C. 2065. Subpart D [Removed] 0

3. Under the authority of 15 U.S.C. 2051, 2076, remove part 1401.

PART 1402--CB BASE STATION ANTENNAS, TV ANTENNAS, AND SUPPORTING STRUCTURES 0

4. The authority citation for part 1402 continues to read as follows:

Authority: 15 U.S.C. 2051, 2076. Sec. 1402.1 [Amended] 0

6. Amend Sec. 1402.4 by removing and reserving paragraph (b).

PART 1406--COAL AND WOOD BURNING APPLIANCES--NOTIFICATION OF PERFORMANCE AND TECHNICAL DATA 0

8. Amend Sec. 1406.1 by revising paragraph (a) to read as follows:

Sec. 1406.1 Scope, purpose, and effective date. (a) Scope. This part requires manufacturers, including importers, of coal and wood burning appliances, as defined in Sec. 1406.3(a), to provide consumers with a specified notification concerning the installation, operation, and maintenance of the appliances. The notification is intended to provide consumers with technical and performance information related to the safety of the appliances. * * * * * Sec. 1406.2 [Amended] 0

10. Remove Sec. 1406.5.

Alberta E. Mills, Secretary, Consumer Product Safety Commission. [FR Doc. 2026-14934 Filed 7-22-26; 8:45 am] BILLING CODE 6355-01-P