STANDARDS FOR BRIDGES, O. Reg. 104/97
Section 1
Cite as STANDARDS FOR BRIDGES, O. Reg. 104/97, s. 1 · current to November 11, 2026 · consolidated from December 6, 2010 · read from e-Laws on November 16, 2026
The text
In this Regulation,
“Canadian Highway Bridge Design Code” means the “Canadian Highway Bridge Design Code” designated as CAN/CSA-S6-06 published by the Canadian Standards Association and the “Commentary on CAN/CSA-S6-06, Canadian Highway Bridge Design Code” published by the Canadian Standards Association, as amended from time to time;
“evaluation” has the meaning set out in the General Technical Definitions of the Canadian Highway Bridge Design Code;
“Ontario Structure Inspection Manual” means the “Ontario Structure Inspection Manual (OSIM)”, published by the Ministry and dated October 2000 (revised November 2003 and April 2008), as amended from time to time and available from the Ministry;
“professional engineer” means a person who holds a licence or a temporary licence issued under the Professional Engineers Act to engage in the practice of professional engineering, but does not include a person who holds a limited licence issued under that Act;
“rehabilitation” has the meaning set out in the General Technical Definitions of the Canadian Highway Bridge Design Code;
“Structural Manual” means the “Structural Manual” published by the Ministry and dated April 2008, as amended from time to time and available from the Ministry. O. Reg. 104/97, s. 1; O. Reg. 160/02, s. 1; O. Reg. 278/06, s. 1; O. Reg. 472/10, s. 1.
Read the STANDARDS FOR BRIDGES on e-Laws ↗
Made under Public Transportation and Highway Improvement Act, R.S.O. 1990, c. P.50.