DIVING OPERATIONS, O. Reg. 629/94
Section 40
Cite as DIVING OPERATIONS, O. Reg. 629/94, s. 40 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) The diving supervisor for a diving operation shall ensure that any breathing mixture supply line used in surface-supplied diving,
(a) is adequate;
(b) has an internal diameter sufficient to permit adequate flow rates and pressures;
(c) is protected in a way that ensures against damage at the dive site; and
(d) is protected against kinking.
(2) Each employer associated with a diving operation and the diving supervisor for a diving operation shall ensure that each breathing mixture supply line used in surface-supplied diving is fitted with an adequate breathing mixture supply valve.
(3) Each employer associated with a diving operation and the diving supervisor for a diving operation shall ensure that the breathing mixture supply valve of any diver engaged in surface-supplied diving is,
(a) readily accessible to dive site personnel;
(b) protected in a way that ensures against damage at the dive site;
(c) clearly marked to permit dive site personnel to identify the diver whose breathing mixture supply it controls; and
(d) under the care and control of a competent person.
(4) Each employer associated with a diving operation and the diving supervisor for a diving operation shall ensure that each breathing mixture supply line used in surface-supplied diving is fitted with an adequate pressure gauge installed,
(a) downstream of the diver’s supply valve, except where the diver’s supply valve is a position indicating valve; and
(b) in a way that permits dive site personnel a clear and unobstructed view of its dial and figures. O. Reg. 629/94, s. 40.
Read the DIVING OPERATIONS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.