DIVING OPERATIONS, O. Reg. 629/94
Section 36
Cite as DIVING OPERATIONS, O. Reg. 629/94, s. 36 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) The diving supervisor for a diving operation shall ensure that S.C.U.B.A. is not used by,
(a) a diver working near or in an operating underwater intake;
(b) a diver working near or in a pipe, tunnel, duct or other confined space;
(c) a diver working at a water control structure;
(d) a diver using any power tool, hoisting device, burning equipment or welding equipment;
(e) a diver placing any materials underwater in a way that poses a risk to the health or safety of the diver;
(f) a diver operating at depths in excess of 100 feet;
(g) a diver working in a diving operation to which Part XI applies;
(h) a diver handling an explosive device, unless the diver is a police diver engaged in a diving operation, including a diving operation for training purposes, that involves searching for and disposing of explosives; or
(i) a diver participating in a UXO diving operation, unless the diver meets the requirements of Clause 5 of CSA Standard Z275.6-11, “Unexploded Explosive Ordnance (UXO) and Munitions Diving”. O. Reg. 629/94, s. 36 (1); O. Reg. 32/14, s. 32.
(2) For the purposes of clauses (1) (a) and (b), a diver works near a thing where the proximity of the thing to the diver poses a health or safety risk to the diver. O. Reg. 629/94, s. 36 (2).
Read the DIVING OPERATIONS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.