MONUMENTS, O. Reg. 525/91
Section 2
Cite as MONUMENTS, O. Reg. 525/91, s. 2 · current to November 11, 2026 · consolidated from June 30, 2021 · read from e-Laws on November 16, 2026
The text
(1) A surveyor shall define each point in a survey that requires monumentation under this Regulation with a monument that is,
(a) a concrete pin;
(b) a cut cross;
(c) an iron bar;
(c.1) a plastic bar;
(d) a rock bar;
(e) a rock plug;
(f) a rock post;
(g) a short standard iron bar; or
(h) a standard iron bar. O. Reg. 525/91, s. 2 (1); O. Reg. 219/10, s. 2 (1).
(2) A surveyor using a concrete pin shall securely drive or wedge the pin into bedrock, concrete or asphalt so that the top of the pin is flush with the surface of the bedrock, concrete or asphalt, as the case may be. O. Reg. 219/10, s. 2 (2).
(3) A surveyor using a cut cross shall cut the mark into bedrock or concrete so that it is five millimetres across and five millimetres deep. O. Reg. 525/91, s. 2 (3).
(4) A surveyor using an iron bar sixty centimetres long shall plant the bar in the ground so that the top of the bar is not more than ten centimetres above the surface of the ground. O. Reg. 525/91, s. 2 (4).
(5) A surveyor using an iron bar less than sixty centimetres long shall wedge, cement or lead the bar into bedrock, concrete or asphalt so that the top of the bar is not more than five centimetres above the surface of the bedrock, concrete or asphalt, as the case may be. O. Reg. 525/91, s. 2 (5); O. Reg. 219/10, s. 2 (3).
(6) A surveyor using a rock bar shall wedge, cement or lead the bar into bedrock, concrete or asphalt so that the top of the bar is not more than five centimetres above the surface of the bedrock, concrete or asphalt, as the case may be. O. Reg. 219/10, s. 2 (4).
(7) A surveyor using a rock plug shall wedge, cement or lead the plug into bedrock, concrete or asphalt so that the top of the plug is not more than 25 millimetres above the surface of the bedrock, concrete or asphalt, as the case may be. O. Reg. 219/10, s. 2 (4).
(8) A surveyor using a rock post shall wedge, cement or lead the post into bedrock, concrete or asphalt so that at least the underside of the identification cap is flush with the surface of the bedrock, concrete or asphalt, as the case may be. O. Reg. 525/91, s. 2 (8); O. Reg. 219/10, s. 2 (5); O. Reg. 505/21, s. 2.
(9) A surveyor using a short standard iron bar or a standard iron bar shall plant the bar in the ground so that the top of the bar is not more than ten centimetres above the surface of the ground. O. Reg. 525/91, s. 2 (9).
(10) A surveyor shall permanently mark every monument planted by him or her, except a cut cross, with the identification of the surveyor or firm of surveyors for whom the surveyor is agent. O. Reg. 525/91, s. 2 (10).
(11) The identification required by subsection (10),
(a) shall be stamped within five centimetres of the top of the monument to a depth of at least 0.5 millimetres and numbered or lettered from the top down; or
(b) shall be stamped on a tag washer or cap permanently affixed to the monument. O. Reg. 525/91, s. 2 (11); O. Reg. 219/10, s. 2 (6).
Read the MONUMENTS on e-Laws ↗
Made under Surveyors Act, R.S.O. 1990, c. S.29.