CONSTRUCTION PROJECTS, O. Reg. 213/91
Section 80
Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 80 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026
The text
(1) A portable ladder at a project shall be manufactured and shall meet the design, performance, test and marking requirements of a Grade 1, Grade 1A or Grade 1AA ladder in the CSA Standard Z11-12, Portable Ladders. O. Reg. 345/15, s. 13.
(2) Despite subsection (1), a portable single ladder that is custom-built for use at a project may be used at the project if the ladder has,
(a) rungs spaced at 300 millimetres on centres;
(b) side rails at least 300 millimetres apart; and
(c) a maximum length, measured along its side rail, of not more than nine metres. O. Reg. 345/15, s. 13.
(3) If a portable single ladder under subsection (2) is made of wood, the ladder shall also,
(a) be made of wood that is straight-grained and free of loose knots, sharp edges, splinters and shakes; and
(b) not be painted or coated with an opaque material that obscures the wood grain or interferes with inspections of the ladder. O. Reg. 345/15, s. 13.
(4) If the rungs of a ladder under subsection (3) are of the cleat type, the ladder shall also,
(a) have side rails that are not less than 400 millimetres but not more than 610 millimetres apart;
(b) have side rails that measure not less than,
(i) 38 millimetres by 89 millimetres if the ladder is 5.8 metres long or less, or
(ii) 38 millimetres by 140 millimetres if the ladder is more than 5.8 metres long;
(c) have rungs that measure not less than,
(i) 19 millimetres by 64 millimetres if the side rails are 400 millimetres apart, or
(ii) 19 millimetres by 89 millimetres if the side rails are more than 400 millimetres apart; and
(d) have rungs braced by filler blocks that are at least 19 millimetres thick and located between the rungs. O. Reg. 345/15, s. 13.
(5) If a ladder under subsection (3) is a double-width wooden ladder, the ladder shall also,
(a) have three evenly-spaced rails that measure at least 38 millimetres by 140 millimetres;
(b) have rungs that,
(i) measure at least 38 millimetres by 89 millimetres,
(ii) extend the full width of the ladder, and
(iii) are braced by filler blocks that are at least 19 millimetres thick; and
(c) be at least 1.5 metres wide but not more than 2 metres wide. O. Reg. 345/15, s. 13.
Read the CONSTRUCTION PROJECTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.