CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 204

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 204 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) Before a drill hole for loading explosives is drilled, the exposed surface shall be examined for drill holes or remnants of drill holes that may contain explosives and any explosive found shall be removed if practicable. O. Reg. 213/91, s. 204 (1). (2) No drill hole shall be drilled, (a) 7.5 metres or less from another hole that is being loaded with or contains explosives; and (b) 150 millimetres or less from another hole or remnant of a hole that has been charged or blasted unless adequate precautions have been taken to ensure that the other hole is free from explosives. O. Reg. 213/91, s. 204 (2); O. Reg. 142/17, s. 23 (1, 2). (3) Clause (2) (a) does not apply to a hole being drilled adjacent to another hole that is being loaded with explosives, (a) if an engineer prepares a specification showing the location of the drill hole and the adjacent hole and describing the precautions to be taken to prevent the accidental detonation by the drilling operation of the explosives in the adjacent hole; and (b) if the drilling is done as described in the specification referred to in clause (a). O. Reg. 213/91, s. 204 (3); O. Reg. 375/22, s. 5. (4) No drill hole permitted under subsection (3) shall be drilled one metre or less from another hole containing explosives. O. Reg. 213/91, s. 204 (4); O. Reg. 142/17, s. 23 (3). (5) The engineer’s specification shall be in writing. O. Reg. 213/91, s. 204 (5); O. Reg. 85/04, s. 20; O. Reg. 375/22, s. 4. (6) The employer responsible for blasting shall keep a copy of the specification at the project until the blasting to which the specification refers is completed. O. Reg. 213/91, s. 204 (6).
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.