CONSTRUCTION PROJECTS, O. Reg. 213/91
Section 156.1
Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 156.1 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026
The text
(1) Before the start of any drilling operation on a project with a rotary foundation drill rig,
(a) an inspection of the work area shall be conducted to identify,
(i) potential hazards, including utilities, services, obstructions, structures and soil conditions that may endanger a worker engaged in, or in the vicinity of, the drilling operation, and
(ii) buildings and structures adjacent to, or in the vicinity of, the drilling operation that may be affected by it;
(b) any hazards identified under subclause (a) (i) shall be removed if practicable;
(c) if it is not practicable to remove the hazards identified under subclause (a) (i),
(i) if practicable, they shall be disconnected or inactivated so as not to endanger workers engaged in, or in the vicinity of, the drilling operation, and
(ii) they shall be located and marked by signs; and
(d) a written report shall be prepared that indicates,
(i) all of the hazards identified under subclause (a) (i),
(ii) which hazards have not been removed, and
(iii) which hazards have been disconnected or inactivated. O. Reg. 345/15, s. 19.
(2) The constructor shall keep a copy of the report mentioned under clause (1) (d) at the project until the drilling operation is completed, and make the report available, upon request, to an inspector and an employer responsible for the drilling operation. O. Reg. 345/15, s. 19.
Read the CONSTRUCTION PROJECTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.