CONSTRUCTION PROJECTS, O. Reg. 213/91
Section 151
Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 151 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026
The text
(1) No crane or similar hoisting device shall be subjected to a load greater than its rated load-carrying capacity, other than during load tests required by the manufacturer. O. Reg. 241/23, s. 7 (1).
(2) The manufacturer of a crane or similar hoisting device or an engineer shall determine its rated load-carrying capacity in accordance with,
(a) for a mobile crane, CSA Standard Z150-16 or CSA Standard Z150.3-17; and
(b) for a tower crane, CSA Standard Z248-17. O. Reg. 213/91, s. 151 (2); O. Reg. 375/22, s. 5; O. Reg. 241/23, s. 7 (2).
(3) Every crane or similar hoisting device shall have affixed to it,
(a) a load rating chart that the operator can read while at the controls that contains enough information for the operator to determine the load that can be lifted for each configuration of the crane or hoisting device; or
(b) a plate with the crane model and serial number or other traceable method that can be used in conjunction with crane-specific load charts that the operator can read while at the controls of the crane while it is in use. O. Reg. 241/23, s. 7 (3).
(3.1) If an operator is using a remote control device, they shall have access to a load rating chart at all times. O. Reg. 241/23, s. 7 (3).
(4) A luffing boom crane shall have a boom angle indicator that the operator can read while at the controls. O. Reg. 241/23, s. 7 (4).
Read the CONSTRUCTION PROJECTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.