CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 144

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 144 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) An elevating work platform shall be designed by an engineer in accordance with good engineering practice, (a) to meet the requirements of the applicable National Standards of Canada standard, set out in the Table to subsection (6); and (b) to support a minimum of 1.3 kilonewtons rated working load as determined in accordance with the applicable National Standards of Canada standard set out in the Table to subsection (6). O. Reg. 213/91, s. 144 (1); O. Reg. 375/22, s. 5. (2) An elevating work platform shall be manufactured in accordance with the design referred to in subsection (1). O. Reg. 213/91, s. 144 (2). (3) An elevating work platform, (a) shall be tested in accordance with the National Standards of Canada standard set out in the Table to subsection (6); and (b) shall be inspected each day before use, in accordance with the manufacturer’s instructions by a worker trained in accordance with section 147. O. Reg. 213/91, s. 144 (3). (4) An elevating work platform shall only be used if an engineer has certified in writing that it complies with the National Standards of Canada standard set out in the Table to subsection (6). O. Reg. 213/91, s. 144 (4); O. Reg. 375/22, s. 5. (5) The certification required by subsection (4) shall include the details of testing. O. Reg. 213/91, s. 144 (5). (6) The National Standards of Canada standard applicable to the type of elevating work platform listed in Column 1 of the Table to this subsection are the standards set out opposite it in Column 2: TABLE Item | Column 1 Type of elevating work platform | Column 2 National Standards of Canada standard 1. | Elevating Rolling Work Platform | CAN3-B354.1-M82 2. | Self-Propelled Elevating Work Platform | CAN3-B354.2-M82 and CAN3-B354.3-M82 3. | Boom-Type Elevating Work Platform | CAN3-B354.4-M82 4. | Vehicle-Mounted Aerial Device | CAN/CSA-C225-10 (7) An elevating work platform shall be equipped with guardrails. O. Reg. 213/91, s. 144 (7). (8) An elevating work platform shall have signs that are clearly visible to an operator at its controls indicating, (a) the rated working load; (b) all limiting operating conditions including the use of outriggers, stabilizers and extendable axles; (c) the specific firm level surface conditions required for use in the elevated position; (d) such warnings as may be specified by the manufacturer; (e) other than for a boom-type elevating work platform, the direction of machine movement for each operating control; (f) the name and number of the National Standards of Canada standard to which it was designed; and (g) the name and address of the owner. O. Reg. 213/91, s. 144 (8).
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.