CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 141.6

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 141.6 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) Only a designated competent worker who has successfully completed the training program under section 138.1 shall install, alter or dismantle a suspended work platform system or boatswain’s chair. O. Reg. 242/16, s. 11. (2) A suspended work platform system or boatswain’s chair, including all components and connections of the suspended work platform system or boatswain’s chair, shall be erected, installed, used and dismantled in accordance with the manufacturer’s instructions and, (a) a generic installation drawing; or (b) in the case of a suspended work platform system, a site-specific drawing if not all of the requirements in the generic installation drawing can be satisfied or if one of the circumstances set out in subsection (3) applies. O. Reg. 242/16, s. 11. (3) The following are circumstances for the purposes of clause (2) (b): 1. There will be stacked or tiered work platforms. 2. There will be a work platform that, including its components, weighs more than 525 kilograms. 3. There will be a work platform that has a span greater than 12 metres between adjacent points of suspension. 4. There will be a work platform that has more than two primary suspension lines. 5. More than two hoisting devices will be used to move a work platform. 6. There will be a work platform that has any shielding, tarpaulin, enclosure, sign or banner on it that may increase the wind loads on the components of the suspended work platform system. 7. The vertical distance between the top of a suspension line and the lowest point on the street, ground or other horizontal surface under a work platform will exceed 150 metres. O. Reg. 242/16, s. 11.
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.