CONSTRUCTION PROJECTS, O. Reg. 213/91

Section 137.3

Cite as CONSTRUCTION PROJECTS, O. Reg. 213/91, s. 137.3 · current to November 11, 2026 · consolidated from April 20, 2026 · read from e-Laws on November 16, 2026

The text

(1) A work platform shall not be used unless the requirements of this section have been satisfied. O. Reg. 242/16, s. 11. (2) In the case of a work platform designed before January 1, 2017, an engineer shall prepare a report that confirms that the structural integrity of the work platform is at least equal to the structural integrity of a work platform designed in accordance with sections 137 and 137.1. O. Reg. 242/16, s. 11; O. Reg. 375/22, s. 5. (3) In the case of a work platform designed on or after January 1, 2017, an engineer shall prepare a report that, (a) confirms that the work platform meets the requirements of sections 137 and 137.1; (b) confirms that the suspended work platform’s design and configuration have been tested to and meet the performance requirements set out in sections 7 to 11 of the ANSI/UL 1322-2004 Standard, “Fabricated Scaffold Planks and Stages”, for the rated platform capacity and worst-case configurations; (c) provides the results of the tests described in clause (b); (d) subject to subsection (4), provides proof that the manufacturer of a suspended work platform or suspended work platform module has been certified to International Standard ISO 9001, Quality management systems – Requirements; and (e) includes, if required under subsection (4), the quality assurance report described in clause (4) (c). O. Reg. 242/16, s. 11; O. Reg. 375/22, s. 5. (4) If there is no proof available that the manufacturer has been certified to ISO 9001, an engineer shall, (a) ensure that every critical weld of the work platform is subjected to a non-destructive test; (b) examine all components of the work platform to ensure they are manufactured in accordance with the design drawings referred to in section 137.2; (c) prepare a written quality assurance report that, (i) confirms that every critical weld and every structural component referred to in subsection 139.1 (2) is correctly manufactured and has no defects, and (ii) includes the results of non-destructive tests described in clause (a) and the examination described in clause (b). O. Reg. 242/16, s. 11; O. Reg. 375/22, s. 5. (5) The work platform shall be assembled in accordance with the manufacturer’s instructions for assembly. O. Reg. 242/16, s. 11. (6) While a work platform is in use at a project, the employer shall, (a) make available to an inspector on request, the design drawings for the work platform; and (b) keep at the project and make available to an inspector on request, the report prepared under subsection (2) or (3) and the manufacturer’s instructions for assembly of the work platform. O. Reg. 242/16, s. 11.
Read the CONSTRUCTION PROJECTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.