Professional Engineers Act, R.S.O. 1990, c. P.28
Section 7
Regulations
Cite as Professional Engineers Act, R.S.O. 1990, c. P.28, s. 7 · current to November 11, 2026 · consolidated from January 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) Subject to the approval of the Lieutenant Governor in Council and with prior review by the Minister, the Council may make regulations,
1. fixing the number of members to be elected to the Council under clause 3 (2) (a) and defining constituencies, and prescribing the number of representatives;
2. respecting and governing the qualifications, nomination, election and term or terms of office of the members to be elected to the Council, and controverted elections;
3. prescribing the conditions disqualifying members of the Council from sitting and governing the filling of vacancies on the Council;
4. prescribing positions of officers of the Association and providing for their election or appointment;
5. respecting the composition of the committees required by this Act, other than the Complaints Committee, the Discipline Committee and the Registration Committee, the mechanism of the appointment of members of the committees and procedures ancillary to those specified in this Act in respect of any committee;
6. respecting matters of practice and procedure before committees required under this Act that do not conflict with the Statutory Powers Procedure Act;
7. prescribing the quorums of the committees required by this Act other than the Complaints Committee, the Discipline Committee and the Registration Committee;
8. governing persons as engineering interns under section 20.1, including setting out the academic requirements necessary for acceptance as an engineering intern and the rights and privileges of engineering interns, and prescribing and governing other classes of persons whose interests are related to those of the Association;
9. respecting any matter ancillary to the provisions of this Act with regard to the issuing, suspension and revocation of licences, certificates of authorization, temporary licences, provisional licences and limited licences, including but not limited to regulations respecting,
i. the scope, standards and conduct of any examination set or approved by the Council as a licensing requirement,
ii. the curricula and standards of professional training programs offered by the Council,
iii. the academic, experience and other requirements for admission into professional training programs,
iv. classes of licences,
v. the academic, experience and other requirements for the issuance of a licence or any class of licence,
v.1 the circumstances in which the Registrar shall refer an application for a licence to a committee for the purposes of clause 14 (4) (b),
v.2 the establishment of an engineering technologist class of limited licence, including prescribing requirements and qualifications for the issuance of an engineering technologist class of limited licence and terms and conditions that shall apply to the engineering technologist class of limited licence, and
vi. other classes of certificates of authorization, temporary licences, provisional licences and limited licences, including prescribing requirements and qualifications for the issuance of specified classes of certificates of authorization, temporary licences, provisional licences and limited licences, and terms and conditions that shall apply to specified classes of certificates of authorization, temporary licences, provisional licences and limited licences;
10. Repealed: 2023, c. 20, Sched. 15, s. 1 (1);
11. requiring the making of returns of information in respect of the holdings of shares and the officers and directors of corporations that apply for or hold certificates of authorization and in respect of the interests of partners that apply for or hold certificates of authorization and governing the requirements;
12. requiring and governing the signing and sealing of documents and designs by members of the Association, holders of temporary licences and holders of limited licences, specifying the forms of seals and respecting the issuance and ownership of seals;
13. requiring members of the Association and holders of certificates of authorization, temporary licences, provisional licences and limited licences to provide specified information or documents to the Registrar for the purposes of this Act, and governing the requirements;
14. requiring and governing the disclosure of the identity of holders of certificates of authorization on documents and designs involving the practice of professional engineering issued by such holders and specifying the form and manner of such disclosure;
15. governing the use of names and designations in the practice of professional engineering by members of the Association and holders of certificates of authorization, temporary licences, provisional licences and limited licences;
16. providing for the maintenance and inspection of registers established for the purposes of section 21;
17. respecting and governing standards of practice and performance standards for the profession;
18. providing for the setting of schedules of suggested fees for professional engineering services and for the publication of the schedules;
19. respecting the advertising of the practice of professional engineering;
20. prescribing a code of ethics;
21. defining professional misconduct for the purposes of this Act;
22. providing for the designation of members of the Association and holders of temporary licences as specialists, prescribing the qualifications and requirements for designation as a specialist, providing for the suspension or revocation of such a designation and for the regulation and prohibition of the use of the designation by members of the Association, a holder of a temporary licence or a certificate of authorization;
23. providing for the designation of members of the Association as consulting engineers, prescribing the qualifications and requirements for designation as a consulting engineer, providing for the suspension or revocation of such a designation and for the regulation and prohibition of the use of the designation by members of the Association, a holder of a temporary licence or a certificate of authorization;
24. prescribing the minimum requirements for professional liability insurance, requiring the delivery to the Registrar of proof of such insurance and prescribing the form of such proof and the manner and time of the delivery;
25. Repealed: 2010, c. 16, Sched. 2, s. 5 (13).
26. providing for the entering into of arrangements by the Association for its members and holders of certificates of authorization, temporary licences, provisional and limited licences respecting indemnity for professional liability and requiring the payment and remittance of premiums in connection therewith and prescribing levies to be paid by members and holders of certificates of authorization, temporary licences, provisional and limited licences in respect of such indemnity for professional liability;
27. governing the continuing education of members and holders of temporary licences, provisional licences and limited licences, including,
i. providing for the development or approval of continuing education and professional development programs,
ii. requiring members and holders to successfully complete or participate in such programs,
iii. providing for sanctions for non-compliance, including suspension or cancellation of a person’s licence, temporary licence, provisional licence or limited licence until the person is in compliance, or the imposition of additional requirements in order to be considered to be in compliance;
28. respecting the duties and authority of the Registrar;
29. prescribing qualifications and requirements that shall be complied with to obtain the reinstatement of a licence, certificate of authorization, temporary licence or limited licence that was cancelled by the Registrar;
30. classifying and exempting any class of holders of licences, certificates of authorization, temporary licences or limited licences from any provision of the regulations under such special circumstances in the public interest as the Council considers advisable;
31. exempting any act within the practice of professional engineering from the application of this Act;
32. specifying acts within the practice of professional engineering that are exempt from the application of this Act when performed or provided by a member of a prescribed class of persons, and prescribing classes of persons for the purpose of the exemption;
33. Repealed: 2010, c. 16, Sched. 2, s. 5 (14).
34. prescribing provisions of the Not-for-Profit Corporations Act, 2010 that apply to the Association.
(2) A copy of each regulation made under subsection (1),
(a) shall be forwarded to each member of the Association and to each holder of a certificate of authorization, temporary licence, provisional licence or limited licence; and
(b) shall be available for public inspection in the office of the Association. R.S.O. 1990, c. P.28, s. 7 (2); 2001, c. 9, Sched. B, s. 11 (13).
Read the Professional Engineers Act on e-Laws ↗