WELLS, R.R.O. 1990, Reg. 903

Section 1.0.2

Cite as WELLS, R.R.O. 1990, Reg. 903, s. 1.0.2 · current to November 11, 2026 · consolidated from January 1, 2020 · read from e-Laws on November 16, 2026

The text

Sections 36 to 50 of the Act and this Regulation do not apply to any of the following activities that are part of the construction of a well: 1. Inspecting the well using equipment that is not left unattended in the well. 2. Monitoring, sampling or testing the well using equipment that, i. is not used to test the yield of the well or the aquifer, and is not left unattended in the well, or ii. is not used to test the yield of the well or the aquifer, and was previously installed in the well. 3. Installing equipment for monitoring, sampling or testing a test hole or dewatering well, unless, i. the installation of the equipment involves an alteration of the well, other than notching the top of the casing, or ii. the equipment is used to test the yield of the well or the aquifer. O. Reg. 372/07, s. 2.
Read the WELLS on e-Laws ↗

Made under Ontario Water Resources Act, R.S.O. 1990, c. O.40.