OIL AND GAS — OFFSHORE, R.R.O. 1990, Reg. 855

Section 81

Cite as OIL AND GAS — OFFSHORE, R.R.O. 1990, Reg. 855, s. 81 · current to November 11, 2026 · consolidated from July 1, 2022 · read from e-Laws on November 16, 2026

The text

A cathead shall, (a) be operated by a competent person; (b) when a rope is manually operated on it, be, (i) equipped with a blunt smooth-edged rope divider that has a clearance from the friction surface of the cathead of seven millimetres or less, and (ii) operated only when the operating area is clear and the portion of the rope not in use is coiled or spooled; (c) be located so that there is at least 500 millimetres of working area between the outer flanges and a substructure, guardrail or wall; (d) have its controls attended while in use; (e) when a rope or line is in use, have all other ropes and lines placed so that they cannot come in contact with, (i) the cathead, or (ii) the rope or line in use on the cathead; (f) when automatic, have a separate control except where, (i) dual purpose controls are used, and (ii) a locking device prevents an automatic cathead from being accidentally engaged while the other is in operation; (g) have a key seat and projecting key covered with a smooth thimble or plate; (h) when unattended, be kept free of contact with any rope or line; and (i) have only ropes or lines free from splices come in contact with the friction surface. R.R.O. 1990, Reg. 855, s. 81; O. Reg. 421/10, s. 16.
Read the OIL AND GAS — OFFSHORE on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.