MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 87
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 87 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) A workplace in an underground mine shall,
(a) be kept free from accumulations or flows of water which might endanger a worker in the area; and
(b) have a water removal and drainage system to remove excess or unwanted water from the mine to the surface through a pumping system or by other means. O. Reg. 167/16, s. 9.
(2) The water removal and drainage systems referred to in clause (1) (b) shall be maintained in good condition. O. Reg. 167/16, s. 9.
(3) A positive displacement water pump shall be equipped with a relief valve or system. O. Reg. 167/16, s. 9.
(4) Any drain hole in an underground mine shall be,
(a) clearly marked by signs that are visible, readable by workers and clearly distinguished from their surroundings; and
(b) identified on any drawings, plans and specifications relating to that area of the mine. O. Reg. 167/16, s. 9.
(5) An employer and supervisor shall take all reasonable precautions in the circumstances to do the following:
1. Prevent an accumulation or flow of water, either of which might endanger a worker.
2. Guard against an accumulation of water in a chute, raise or waste or ore pass where material in the chute, raise or waste or ore pass may block drainage.
3. Control an accumulation or flow of water in areas of a mine where an accumulation or flow of water is likely to be present. O. Reg. 167/16, s. 9.
(6) Where an accumulation of water is likely to be present, a borehole shall be drilled at least six metres ahead of the working face to protect against a sudden breakthrough of water. O. Reg. 167/16, s. 9.
(7) A drill or blast hole that is located in an area of the mine where an accumulation or flow of water is likely to be present shall be identified on any drawings, plans and specifications relating to that area of the mine. O. Reg. 167/16, s. 9.
(8) A drill or blast hole that could allow water to enter a chute, raise or waste or ore pass shall be filled or plugged to prevent water from entering the chute, raise or waste or ore pass. O. Reg. 167/16, s. 9.
(9) If, despite the requirements in subsections (1), (5), (6), and (8), an accumulation or flow of water that may endanger a worker occurs in an area of an underground mine,
(a) the employer shall ensure that the supervisor for that area is informed of the accumulation or flow of water;
(b) the employer shall ensure that all workers in that area are notified of the accumulation or flow of water;
(c) the employer shall ensure that the area is adequately barricaded to prevent access; and
(d) the employer and the supervisor shall not permit any worker to enter that area unless the purpose of the work directly relates to the management and removal of the water and all reasonable precautions in the circumstances have been taken for the protection of such workers. O. Reg. 167/16, s. 9.
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.