MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 84
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 84 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) If a worker may be endangered by the withdrawal, collapse, shifting or movement of bulk material such as rock, ore or other material in a stope, pass or chute or in a storage area, the employer shall ensure that written procedures for the precautions to be taken before, during and after removal of the material are established and followed. O. Reg. 291/02, s. 3.
(2) The written procedures required by subsection (1) shall address the following matters:
1. The conditions under which workers are required to wear a fall arrest system.
2. The communication of hazards to all persons who may be at risk.
3. The identification of those locations that are not safe for workers to enter.
4. The need to post warning signs that indicate the nature of the danger or hazard and the need to erect barriers to prevent inadvertent access to the area.
5. Any additional protection to be provided to workers required to enter or work in the area. O. Reg. 291/02, s. 3.
(3) No worker shall be positioned so that when the worker is pulling a chute his or her access to an exit from the area may be blocked by an uncontrolled run of material, water or slime. O. Reg. 291/02, s. 3.
(4) A mechanical locking device shall be installed on overcut power operated chute gates, so that the gate may be locked in the open or closed position. O. Reg. 291/02, s. 3.
(5) A power-operated safety guard or gate shall be designed and installed to minimize hazards when the power fails. O. Reg. 291/02, s. 3.
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.