MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 51
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 51 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) Where a ladderway is installed in an underground mine or in a headframe used in conjunction with a shaft and the ladderway is inclined at more than seventy degrees from the horizontal,
(a) the ladderway shall be provided with substantial platforms at intervals not greater than seven metres;
(b) the ladders shall be offset at the platform;
(c) except for openings large enough to permit the passage of a worker, the platforms shall be fully closed; and
(d) if installed in a shaft manway, the ladders shall be placed over the openings of the platforms below. R.R.O. 1990, Reg. 854, s. 51 (1).
(2) Where the ladderway is inclined at less than seventy degrees to the horizontal, the ladders may be continuous and the provisions of clauses (1) (a) and (c) shall apply. R.R.O. 1990, Reg. 854, s. 51 (2).
(3) Where a ladderway is inclined at less than fifty degrees to the horizontal, no platform is required except at points of offset. R.R.O. 1990, Reg. 854, s. 51 (3).
(4) Where a ladderway is the only means of access for mine rescue purposes, the opening shall be large enough for such purpose. R.R.O. 1990, Reg. 854, s. 51 (4).
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.