MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 262
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 262 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) Effective illumination by means of stationary lighting shall be provided in an underground mine,
(a) at all active shaft stations and shaft conveyance landings where workers are required to travel or work; and
(b) where the nature of the equipment or the operation may create a hazard due to insufficient illumination. R.R.O. 1990, Reg. 854, s. 262.
(2) Every worker in an underground mine shall wear,
(a) high visibility safety apparel that makes the worker visible to others in the workplace and that meets the requirements set out in subsection (3); and
(b) retro-reflective material applied to the front, back and sides of head gear. O. Reg. 265/15, s. 18.
(3) High visibility safety apparel must meet the following requirements:
1. It shall be made of fluorescent or bright-coloured background material.
2. It shall have retro-reflective striping that,
i. is located on the outside of the garment,
ii. measures at least 50 mm in width,
iii. completely encircles the waist, each arm and each leg below the knee,
iv. is arranged in two vertical lines on the front of the garment, extending over the shoulders and down to the waist, and
v. is arranged in the form of an “X” on the back of the garment, extending from the shoulders and down to the waist. O. Reg. 265/15, s. 18.
(4) All high visibility safety apparel and all retro-reflective material on head gear must be maintained in good condition so that they adequately visually identify a worker. O. Reg. 265/15, s. 18.
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.