MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 243
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 243 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) When equipment or supplies are being transported in a shaft, they shall,
(a) when in a shaft conveyance, be loaded and secured in a manner to prevent shifting;
(b) when secured to a hoisting rope of the conveyance, be secured in a manner to prevent damage to the rope and permit the safety mechanisms of the conveyance to operate; and
(c) when transported below the shaft conveyance or crosshead, be suspended in a manner to prevent contact with shaft furnishings. R.R.O. 1990, Reg. 854, s. 243 (1).
(2) The suspension system or arrangement used to transport equipment or supplies below the shaft conveyance or crosshead shall be capable of withstanding at least four times the maximum allowable design stresses without permanent distortion to any component of the system or arrangement and shall meet the requirements prescribed by subsection 230 (4). R.R.O. 1990, Reg. 854, s. 243 (2).
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.