MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854

Section 227

Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 227 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) A device that permits changing from manual to automatic control shall be installed on an automatic hoist and the device shall be, (a) located where it is readily accessible to the manual controls; and (b) operated only by an authorized worker. R.R.O. 1990, Reg. 854, s. 227 (1). (2) Where a hoist is designed to be operated from control stations located at shaft levels and within a shaft conveyance, the switch for affecting the change-over of the control mode between that at the shaft levels and at the shaft conveyance shall be effective only at the shaft level at which the shaft conveyance is stopped. R.R.O. 1990, Reg. 854, s. 227 (2). (3) Devices installed on the levels for the purpose of selecting the shaft conveyance destination and initiating hoist movement shall be effective only when, (a) the shaft conveyance is stopped at that level; and (b) the installation is designed for call operation. R.R.O. 1990, Reg. 854, s. 227 (3). (4) When an executive signal for hoist motion is given from controls at a level, at least five seconds shall lapse before the hoist moves. R.R.O. 1990, Reg. 854, s. 227 (4). (5) Except for jogging, devices at shaft level control stations for initiating hoist motion shall be effective only when the shaft gate at the level where the conveyance is stopped is closed. R.R.O. 1990, Reg. 854, s. 227 (5). (6) Except for jogging, devices located within a cage for initiating hoist motion shall be effective only when the door of the cage and the gate of the shaft are closed. R.R.O. 1990, Reg. 854, s. 227 (6). (7) Where the controls for initiating hoist motion are located within a cage, a device shall be installed in the cage by which the safety circuit of the hoist can be interrupted. R.R.O. 1990, Reg. 854, s. 227 (7).
Read the MINES AND MINING PLANTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.