MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854

Section 222

Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 222 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) A steam or air powered hoist shall be provided with devices that, (a) protect against an overwind; (b) protect against an underwind, except during shaft sinking; (c) indicate the air or steam pressure for the hoist operator; and (d) permit the air or steam supply to the hoist engine to be readily shut off by the hoist operator. R.R.O. 1990, Reg. 854, s. 222 (1). (2) Where the hoisting plant consists of a single shaft conveyance without a counterweight, the compression of the engine of an air or steam powered hoist may be used as an automatic brake if, (a) the engine is non-reversing; (b) the exhaust restraining valve is fail safe; (c) the piping system is strong enough to withstand the air or steam pressures; (d) the compression has sufficient braking capacity to stop the hoist carrying its maximum load; (e) the normal speed of the hoist is less than 2.5 metres per second; and (f) specifications and arrangements of the hoist have been prepared or checked by an engineer and comply with this section. R.R.O. 1990, Reg. 854, s. 222 (2); O. Reg. 272/97, s. 39; O. Reg. 373/22, s. 14.
Read the MINES AND MINING PLANTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.