MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854

Section 183

Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 183 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) All non-rail-bound diesel-powered equipment that is first used in an underground mine after June 1, 1995 must meet the requirements set out in CSA Standard M424.2:22 “Non-Rail-Bound Diesel-Powered Machines for use in Non-Gassy Underground Mines”. O. Reg. 69/23, s. 26. (2) An employer at an underground mine shall keep and maintain a record for every piece of diesel-powered equipment used in an underground mine and shall keep the records readily available. O. Reg. 69/23, s. 26. (3) The record required under subsection (2) must include, (a) the make, model and serial number of the equipment and of any emission control devices used with the equipment; (b) the rated power, rated RPM, maximum fuel injection rate and ventilation rate as certified in accordance with the CSA Standard referred to in subsection (1); and (c) the capacity of the fuel tanks and hydraulic fluid tanks. O. Reg. 69/23, s. 26. (4) An employer at an underground mine shall keep and maintain the following information relating to the use and operation of diesel-powered equipment in the underground mine: 1. The volume of air flowing in the underground haulageways and workings where the equipment is operating. 2. The total ventilation requirements for the equipment when it is operating in a single continuous course of air. O. Reg. 69/23, s. 26. (5) The employer shall ensure that the information required under subsection (4) is, (a) provided directly to the operators of the diesel-powered equipment or is otherwise available to them in a readily accessible format; and (b) is readily available at the mine site. O. Reg. 69/23, s. 26. (6) No gasoline or other volatile fuel shall be used in the starting mechanism in diesel-powered equipment used in an underground mine. O. Reg. 69/23, s. 26. (7) The fuel used in diesel-powered equipment that is used in an underground mine must, (a) have a flash point of 52℃ or higher; and (b) meet one of the following standards: (i) Canadian General Standards Board CAN/CGSB-3.517-2020 “Diesel Fuel”, as it may be amended from time to time. (ii) Canadian General Standards Board CAN/CGSB-3.520-2020 “Diesel Fuel containing low levels of biodiesel (B1-B5)”, as it may be amended from time to time. (iii) Canadian General Standards Board CAN/CGSB-3.522-2020 “Diesel Fuel containing biodiesel (B6-B20)”, as it may be amended from time to time. O. Reg. 69/23, s. 26.
Read the MINES AND MINING PLANTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.