MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854
Section 18
Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 18 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026
The text
(1) Surface mines and openings on the surface to underground mines shall be protected to prevent inadvertent access where,
(a) the surface mine or opening is a hazard by reason of its depth;
(b) approaches and openings are not readily visible; or
(c) the hazard caused by the surface mine or opening is greater than the hazard caused by the natural topographical features of the area. R.R.O. 1990, Reg. 854, s. 18 (1).
(2) Prior to operations at a mine being terminated, a shaft or raise opening shall be,
(a) capped with a stopping of reinforced concrete; or
(b) filled and kept filled with material so that any subsidence of the material will not endanger any person. R.R.O. 1990, Reg. 854, s. 18 (2).
(3) The stopping prescribed in clause (2) (a) shall be,
(a) secured to solid rock or to a concrete collar secured to solid rock; and
(b) capable of supporting a uniformly distributed load of 18 kilopascals or a concentrated load of 81 kilonewtons, whichever is greater. R.R.O. 1990, Reg. 854, s. 18 (3); O. Reg. 265/15, s. 2.
(4) Where an underground mine is being developed after the 1st day of October, 1979, shafts or raise openings shall be provided with a collar of concrete secured to bedrock. R.R.O. 1990, Reg. 854, s. 18 (4).
Read the MINES AND MINING PLANTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.