MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854

Section 11.1.1

Cite as MINES AND MINING PLANTS, R.R.O. 1990, Reg. 854, s. 11.1.1 · current to November 11, 2026 · consolidated from July 1, 2025 · read from e-Laws on November 16, 2026

The text

(1) Employers engaged in surface diamond drilling operations shall establish and maintain the following components of the Surface Diamond Driller training program: 1. Common Core for Surface Diamond Driller – Part 1 (Basic Level) (Program #P770200). 2. Common Core for Surface Diamond Driller – Part 2 (Helper Level) (Program #P770200). 3. Common Core for Surface Diamond Driller – Part 3 (Runner Level) (Program #P770200). 4. Speciality Modules for Surface Diamond Driller (#P770200). O. Reg. 167/16, s. 5. (2) An employer shall train each worker who performs work as a surface diamond driller in the modules of the program described in subsection (1) appropriate for that worker and shall ensure that the training is completed in accordance with the following requirements: 1. Part 1 (Basic Level) shall be completed before the worker begins performing work covered by the modules of that component of the program. 2. Part 2 (Helper Level) shall be completed within 12 months after the day the worker begins performing work covered by the modules of that component of the program. 3. Part 3 (Runner Level) shall be completed within 12 months after the day the worker begins performing work covered by the modules of that component of the program. 4. Each specialty module shall be completed within 12 months after the day the worker begins performing work covered by the applicable module. O. Reg. 167/16, s. 5. (3) Subsection (2) does not apply to a worker with respect to a module if the worker successfully completed the module before being employed by the employer and gives the employer proof of successful completion. O. Reg. 167/16, s. 5. (4) Revoked: O. Reg. 187/19, s. 5.
Read the MINES AND MINING PLANTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.