INDUSTRIAL ESTABLISHMENTS, R.R.O. 1990, Reg. 851

Section 87.5

Cite as INDUSTRIAL ESTABLISHMENTS, R.R.O. 1990, Reg. 851, s. 87.5 · current to November 11, 2026 · consolidated from July 1, 2022 · read from e-Laws on November 16, 2026

The text

(1) Subsections (2) to (4) apply to a location if the following conditions are met: 1. The location is a runout, pouring or moulding pit or other working space that is, i. more than 60 centimetres below the adjacent floor level, or ii. surrounded by a wall that is more than 60 centimetres high and that a person must pass over to leave the working space. 2. The location was constructed or altered after May 1, 1995. 3. Workers may be exposed to molten material at the location. O. Reg. 230/95, s. 2. (2) Egress shall be provided by means of doorways, ramps or stairs of non-combustible material. O. Reg. 230/95, s. 2. (3) Egress ramps and stairs shall be made of slip-resistant material. O. Reg. 230/95, s. 2. (4) If the location is more than 15 square metres in area, or if any point within the location is more than 5 metres from an egress doorway, ramp or stair, (a) at least two doorways, ramps or stairs shall be provided, situated at a distance from each other that is at least three-quarters of the greatest diagonal dimension of the location, measured on the horizontal plane; and (b) a doorway, ramp or stair shall be provided within 25 metres of any point within the location. O. Reg. 230/95, s. 2.
Read the INDUSTRIAL ESTABLISHMENTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.