INDUSTRIAL ESTABLISHMENTS, R.R.O. 1990, Reg. 851
Section 51
Cite as INDUSTRIAL ESTABLISHMENTS, R.R.O. 1990, Reg. 851, s. 51 · current to November 11, 2026 · consolidated from July 1, 2022 · read from e-Laws on November 16, 2026
The text
(1) A lifting device shall,
(a) be so constructed, of such strength and be equipped with suitable ropes, chains, slings and other fittings so as to adequately ensure the safety of all workers;
(b) be thoroughly examined by a competent person to determine its capability of handling the maximum load as rated,
(i) prior to being used for the first time, and
(ii) thereafter as often as necessary but not less frequently than recommended by the manufacturer and in any case, at least once a year,
and a record shall be kept, signed by the competent person doing the examination;
(c) be plainly marked with sufficient information so as to enable the operator of the device to determine the maximum rated load that the device is capable of lifting under any operating condition;
(d) have a cab, screen, canopy guard or other adequate protection for the operator where the operator may be exposed to the hazard of falling material; and
(e) when it is a pneumatic or hydraulic hoist, have controls that automatically return to their neutral position when released. R.R.O. 1990, Reg. 851, s. 51 (1); O. Reg. 420/10, s. 8 (1); O. Reg. 421/21, s. 2 (1).
(1.1) Where a record is required to be kept under clause (1) (b), it shall be kept for,
(a) a period of at least one year; or
(b) such longer period as is necessary to ensure that at least the two most recent records are kept. O. Reg. 421/21, s. 2 (2).
(2) A lifting device shall be operated,
(a) only by,
(i) a competent person, or
(ii) a worker being instructed who is accompanied by a competent person; and
(b) in such a way that,
(i) no part of the load passes over any worker,
(ii) where a worker may be endangered by the rotation or uncontrolled motion of a load, one or more guide ropes is used to prevent rotation or other uncontrolled motion, and
(iii) subject to subsection (3), when its load is in a raised position the controls are attended by an operator. R.R.O. 1990, Reg. 851, s. 51 (2).
(3) Subclause (2) (b) (iii) does not apply to,
(a) a hydraulic hoist that supports the load from below and is fixed in one location; and
(b) an assembly line hoist temporarily unattended during a stoppage of the assembly line. R.R.O. 1990, Reg. 851, s. 51 (3).
(4) Hoisting controls operated from other than a cab or cage shall,
(a) be located so that they can be operated at a safe distance from a load being lifted; and
(b) automatically return to their neutral position when released. R.R.O. 1990, Reg. 851, s. 51 (4).
(5) Where a lifting device is equipped with one or more limit switches,
(a) each limit switch shall automatically cut off the power and apply the brake when the limit is reached; and
(b) no limit switch shall be used as an operating control unless,
(i) the limit switch is designed for such use, and
(ii) the lifting device has a second limit switch in addition to the control limit switch. O. Reg. 420/10, s. 8 (2).
Read the INDUSTRIAL ESTABLISHMENTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.