INDUSTRIAL ESTABLISHMENTS, R.R.O. 1990, Reg. 851
Section 105
Cite as INDUSTRIAL ESTABLISHMENTS, R.R.O. 1990, Reg. 851, s. 105 · current to November 11, 2026 · consolidated from July 1, 2022 · read from e-Laws on November 16, 2026
The text
(1) Every employer shall establish and maintain the following training programs, approved by the Ministry:
1. For cutters and skidder operators,
i. Cutter-Skidder Operator (Program # P750000),
ii. Cutter (Program # P750010), and
iii. Skidder-Operator (Program # P750020).
2. For mechanical harvesting equipment operators, Mechanical Harvesting Equipment Operator (Program # P850715) and,
i. Feller Buncher Operator (Program # P750035),
ii. Cut to Length Operator (Program # P750045),
iii. Grapple Skidder Operator (Program # P750055),
iv. Forwarder or Transporter Operator (Program # P750065),
v. Delimber Operator (Program # P750075),
vi. Slasher Operator (Program # P750085), and
vii. Chipper Operator (Program # P750095). O. Reg. 488/01, s. 1; O. Reg. 60/18, s. 6 (1); O. Reg. 186/19, s. 6 (1); O. Reg. 434/21, s. 3 (1, 2).
(2) A document issued by the Ministry, showing that a worker is registered for a training program referred to in subsection (1) or has successfully completed it, is conclusive proof, for the purposes of sections 106, 106.1 and 106.2, of the worker being registered for the program or of his or her successful completion of the program, as the case may be. O. Reg. 488/01, s. 1; O. Reg. 60/18, s. 6 (2); O. Reg. 186/19, s. 6 (2); O. Reg. 434/21, s. 3 (1).
(3) Revoked: O. Reg. 60/18, s. 6 (3).
Read the INDUSTRIAL ESTABLISHMENTS on e-Laws ↗
Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.