CONTROL OF EXPOSURE TO BIOLOGICAL OR CHEMICAL AGENTS, R.R.O. 1990, Reg. 833

Section 13

Requirements: care and maintenance of respirator

Cite as CONTROL OF EXPOSURE TO BIOLOGICAL OR CHEMICAL AGENTS, R.R.O. 1990, Reg. 833, s. 13 · current to November 11, 2026 · consolidated from July 1, 2026 · read from e-Laws on November 16, 2026

The text

A respirator shall be cared for and maintained in accordance with the manufacturer’s instructions. O. Reg. 185/19, s. 6. Table 1 Ontario Table of Occupational Exposure limits Listing | French Listing Equivalent | Agent [CAS No.] | Time-Weighted Average Limit (TWA) | Short-Term Exposure Limit (STEL) or Ceiling Limit (C) | Notations 1. | 4. | *Acrylonitrile [107-13-1] | 2 ppm | C 10 ppm | Skin 2a. | 50a. | Revoked: O. Reg. 287/17, s. 3 (1) 2b. | 50b. | Revoked: O. Reg. 287/17, s. 3 (1) 3. | 7. | *Arsenic, elemental arsenic and inorganic compounds [7440-38-2], and organic compounds (only where both inorganic and organic compounds are present), as As. | 0.01 mg/m3 | 0.05 mg/m3 4a. | 5a. | *Asbestos – All forms [1332-21-4] | 0.1 f/cc (F) 4b. | 5b. | *Asbestos – Actinolite [77536-66-4] | 0.1 f/cc (F) 4c. | 5c. | *Asbestos – Amosite [12172-73-5] | 0.1 f/cc (F) 4d. | 5d. | *Asbestos – Anthophyllite [77536-67-5] | 0.1 f/cc (F) 4e. | 5e. | *Asbestos – Chrysotile [132207-32-0] | 0.1 f/cc (F) 4f. | 5f. | *Asbestos – Crocidolite [12001-28-4] | 0.1 f/cc (F) 4g. | 5g. | *Asbestos – Tremolite [77536-68-6] | 0.1 f/cc (F) 5. | 10. | Benzaldehyde [100-52-7] | 4 ppm, or 17 mg/m3 6. | 11. | *Benzene [71-43-2] | 0.5 ppm | 2.5 ppm | Skin 7. | 12. | Revoked: O. Reg. 287/17, s. 3 (1) 8. | 19. | Calcium chloride [10043-52-4] | 5 mg/m3 9. | 15. | Carbon tetrachloride [56-23-5] | 2 ppm | 3 ppm | Skin 10. | 16. | Charcoal, except activated [16291-96-6] | 10 mg/m3 11. | 66. | Chlorinated diphenyl oxides [55720-99-5] | 0.5 mg/m3 | 2 mg/m3 12. | 17. | o-Chlorobenzaldehyde [89-98-5] | 4 ppm, or 23 mg/m3 13a. | 14a. | Chlorodiphenyl (42 per cent chlorine) [53469-21-9] | See listing for Polychlorinated Biphenyls (PCBs) 13b. | 14b. | Chlorodiphenyl (54 per cent chlorine) [11097-69-1] | See listing for Polychlorinated Biphenyls (PCBs) 14. | 22. | N-Cocomorpholine [1541-81-7] | 5 ppm, or 52 mg/m3 | Skin 15. | 46. | *Coke Oven Emissions1 | 0.15 mg/m3 16. | 87. | Coumarone-Indene Resins (total dust) [63393-89-5] | 5 mg/m3 17. | 24. | Cymene (sum of o-, m- and p-isomers) [25155-15-1] | 50 ppm, or 274 mg/m3 | Skin 18. | 28. | 1,1-Dichloroethene [75-35-4] | 1 ppm, or 4 mg/m3 | 20 ppm, or 80 mg/m3 19. | 29. | 1,3-Dichloro-2-Propanol [96-23-1] | 1 ppm, or 5 mg/m3 | Skin 20. | 40. | Diethylene glycol monoethyl ether [111- 90-0] | 30 ppm, or 165 mg/m3 21. | 74. | Di(2-ethylhexyl)phthalate (DEHP) [117-81-7] | 3 mg/m3 | 5 mg/m3 22. | 73. | Diisodecyl phthalate [26761-40-0] | 5 mg/m3 23. | 30. | 3-(Dimethylamino) propylamine [109-55-7] | 0.5 ppm, or 2 mg/m3 | Skin 24. | 31. | N, N-Dimethyl-cyclohexylamine [98-94-2] | 5 ppm, or 26 mg/m3 25. | 32. | N, N-Dimethyl-ethanolamine [108-01-0] | 3 ppm, or 11 mg/m3 | 6 ppm, or 22 mg/m3 26. | 103. | Dimethyl terephthalate [120-61-6] | 5 mg/m3 27. | 18. | Dimethyl 2,3,5,6-tetracholoroterephthalate [1861-32-1] | 5 mg/m3 28. | 59. | Dipropylene glycol monomethyl ether acetate [88917-22-0] | 100 ppm, or 776 mg/m3 | 150 ppm, or 1,164 mg/m3 29. | 34. | Diquat [2764-72-9; 85-00-7; 6385-62-2] | 0.5 mg/m3, or 0.1 mg/m3(R) | Skin 30. | 35. | Enflurane [13838-16-9] | 2 ppm, or 16 mg/m3 31. | 42. | Ethyl-3-ethoxy propionate[763-69-9] | 50 ppm, or 300 mg/m3 32. | 26. | Ethylene dibromide [106-93-4] | (L) | Skin 33. | 39. | Ethylene glycol dimethyl ether [110-71-4] | 5 ppm, or 18 mg/m3 | Skin 34. | 41. | Ethylene glycol mono-n-propyl ether [2807-30-9] | 25 ppm, or 110 mg/m3 | Skin 35. | 63. | Ethylene glycol mononitrate[16051-48-2] | 0.05 ppm, or 0.22 mg/m3 | Skin 36. | 67. | *Ethylene oxide [75-21-8] | 1 ppm, or 1.8 mg/m3 | 10 ppm, or 18 mg/m3 37. | 57. | Ethyl methacrylate [97-63-2] | 50 ppm | 100 ppm 38. | 79. | Flour dust | See listing for Wheat Flour Dust (total dust) 39. | 44. | Forane [26675-46-7] | 2 ppm, or 15 mg/m3 40. | 45. | Formaldehyde [50-00-0] | STEL 1 ppm, or C 1.5 ppm 41. | 47. | Halothane [151-67-7] | 2 ppm, or 16 mg/m3 42. | 1. | Heptyl acetate [112-06-1] | 50 ppm, or 320 mg/m3 43. | 48. | Hexamethylenetetramine (HMT) [100-97-0] | 0.35 ppm, or 2 mg/m3 44. | 49. | Hexamethyl phosphoramide [680-31-9] | (L) | Skin 45. | 2. | Hexyl acetate (isomeric mixture) [88230-35-7] | 50 ppm, or 294 mg/m3 46. | 97. | Hydrogen sulfide [7783-06-4] | 10 ppm | 15 ppm 47. | 104. | Hydrogenated terphenyls2 [61788-32-7] | 0.5 ppm 48a. | 52a. | *Isocyanates, organic compounds – Toluene diisocyanate (TDI) [584-84-9] [91-08-7] | 0.005 ppm | C 0.02 ppm 48b. | 52b. | *Isocyanates, organic compounds – Methylene bisphenyl isocyanate (MDI) [101-68-8] | 0.005 ppm | C 0.02 ppm 48c. | 52c. | *Isocyanates, organic compounds – Hexamethylene diisocyanate (HDI) [822-06-0] | 0.005 ppm | C 0.02 ppm 48d. | 52d. | *Isocyanates, organic compounds – Isophorone diisocyanate (IPDI) [4098-71-9] | 0.005 ppm | C 0.02 ppm 48e. | 52e. | *Isocyanates, organic compounds – Methylene bis (4-cyclohexylisocyanate) [5124-30-1] | 0.005 ppm | C 0.02 ppm 48f. | 52f. | *Isocyanates, organic compounds – Methyl Isocyanate [624-83-9] | 0.02 ppm | 0.06 ppm | Skin 48g. | 52g. | *Isocyanates, organic compounds – Ethyl isocyanate [109-90-0] | 0.02 ppm | 0.06 ppm | Skin 48h. | 52h. | *Isocyanates, organic compounds – Phenyl isocyanate [103-71-9] | 0.005 ppm | 0.015 ppm | Skin 49. | 53. | Isopropylaminoethanols [109-56-8] [121-93-7] | 400 ppm, or 1,900 mg/m3 50. | 33. | Isosorbide dinitrate [87-33-2] | 0.2 mg/m3 | Skin 51a. | 77a. | *Lead [7439-92-1], elemental lead, inorganic and organic compounds of lead, as Pb – except tetraethyl lead [78-00-2] | 0.05 mg/m3 | Skin (organic compounds) 51b. | 77b. | *Lead [7439-92-1] – Tetraethyl lead, as Pb [78-00-2] | 0.10 mg/m3 | 0.30 mg/m3 52a. | 21a. | *Lead chromate [7758-97-6] – as Pb (see listing for lead) [7439-92-1] | 0.05 mg/m3 52b. | 21b. | *Lead chromate [7758-97-6] – as Cr | 0.012 mg/m3 53. | 54. | Lincomycin [154-21-2] | 0.1 mg/m3 54a. | 51a. | Lithium hydroxide – Anhydrous [1310-65-2] | 1 mg/m3 54b. | 51b. | Lithium hydroxide – Monohydrate [1310-66-3] | 1 mg/m3 55. | 55. | Manganese [7439-96-5] | 0.2 mg/m3 56a. | 56a. | *Mercury [7439-97-6], elemental mercury, inorganic and organic compounds of mercury, as Hg – All forms of except alkyl, as Hg | 0.025 mg/m3 | Skin 56b. | 56b. | *Mercury [7439-97-6] – Alkyl compounds of, as Hg | 0.01 mg/m3 | 0.03 mg/m3 | Skin 57. | 58. | Methoxyflurane [76-38-0] | 2 ppm, or 13 mg/m3 58. | 60. | Methyl n-amyl ketone [110-43-0] | 25 ppm, or 115 mg/m3 59. | 38. | Methyl tert-butyl ether (MTBE) [1634-04-4] | 40 ppm 60. | 61. | Methyl n-butyl ketone [591-78-6] | 1 ppm, or 4 mg/m3 | Skin 61. | 27. | 4,4'-Methylene bis(2-chloroaniline) (MBOCA; MOCA®)[101-14-4] | 0.0005 ppm, or 0.005 mg/m3 | Skin 62. | 25. | 4,4'-Methylene dianiline [101-77-9] | 0.04 mg/m3 | Skin 63. | 62. | N-Methyl-2-pyrrolidone [872-50-4] | 400 mg/m3 64. | 36. | Mineral Spirits | 525 mg/m3 65. | 98. | Nepheline syenite (total dust) [37244-96-5] | 10 mg/m3 66a. | 64a. | Nickel – Elemental/metal [7440-02-0] | 1 mg/m3(I) 66b. | 64b. | Nickel – Insoluble compounds, as Ni [7440-02-0] | 0.2 mg/m3(I) 66c. | 64c. | Nickel – Soluble compounds, as Ni [7440-02-0] | 0.1 mg/m3(I) 66d. | 64d. | Nickel – Nickel subsulfide, as Ni [12035-72-2] | 0.1 mg/m3(I) 67. | 8. | Nitrogen dioxide [10102-44-0] | 3 ppm | 5 ppm 68. | 65. | N-Nitrosamines, including n-Nitrosodimethylamine [62-75-9] | (L) | Skin 69. | 9. | Nitrous oxide [10024-97-2] | 25 ppm, or 45 mg/m3 70. | 68. | Ozone [10028-15-6] | 0.1 ppm, or 0.2 mg/m3 | 0.3 ppm, or 0.6 mg/m3 71. | 69. | Paraquat [4685-14-7] | 0.1 mg/m3 72. | 70. | Particles (Insoluble or Poorly Soluble) Not Otherwise Specified (PNOS) | 10 mg/m3(I), or 3 mg/m3(R) 73. | 71. | Penicillin (total dust) [1406-05-9] | 0.1 mg/m3 74. | 101. | Pentaerythritol tetrabenzoate [4196-86-5] | 2 mg/m3 75. | 23. | Petroleum coke (total dust) [64741-79-3] | 3.5 mg/m3(a) 76. | 72. | 2-Phenoxyethanol [122-99-6] | 25 ppm, or 141 mg/m3 | Skin 77a. | 76a. | Platinum[7440-06-4] – Metal | 1 mg/m3 77b. | 76b. | Platinum[7440-06-4] – Water-soluble compounds of, including chloroplatinates (as Pt) | 0.002 mg/m3 78. | 13. | Polychlorinated biphenyls (PCBs)2 | 0.05 mg/m3 79. | 84. | Poultry dust (total dust) | 5 mg/m3 80. | 85. | 1,2-Propylene glycol [57-55-6] | 50 ppm (V), or 155 mg/m3(V), or 10 mg/m3(H)(b) 81. | 3. | Propylene glycol monomethyl ether acetate [108-65-6] | 50 ppm, or 270 mg/m3 82. | 88. | Selenium hexafluoride, as Se [7783-79-1] | 0.025 ppm, or 0.1 mg/m3 83. | 82. | Shellac dust (total dust) [9000-59-3] | 10 mg/m3 84a. | 91a. | *Silica, Crystalline – Quartz/Tripoli [14808-60-7; 1317-95-9] | 0.10 mg/m3(R) 84b. | 91b. | *Silica, Crystalline – Cristobalite [14464-46-1] | 0.05 mg/m3(R) 85. | 90. | Silica fume [69012-64-2] | 2 mg/m3(R) 86. | 89. | Silica fused [60676-86-0] | 0.1 mg/m3(R) 87a. | 92a. | Silicon carbide [409-21-2] – Non-fibrous | 10 mg/m3(I)(E), or 3 mg/m3(R)(E) 87b. | 92b. | Silicon carbide [409-21-2] – Fibrous (including whiskers) | 0.1 f/cc (R)(F) 88. | 83. | Sisal dust (total dust) | 2 mg/m3 89. | 81. | Soap dust [68918-36-5] | 5 mg/m3 90. | 95. | Spectinomycin [1695-77-8] | 2 mg/m3 91. | 93. | Stoddard Solvent –140ºF Flash Aliphatic Solvent, Type of Stoddard Solvent | 525 mg/m3 92. | 96. | Styrene – monomer [100-42-5] | 35 ppm | 100 ppm 93. | 94. | Sulfur dioxide [7446-09-5] | 2 ppm, or 5.2 mg/m3 | 5 ppm, or 10.4 mg/m3 94a. | 43a. | Synthetic Vitreous Fibres (Man Made Mineral Fibres) – Continuous filament glass fibres | 5 mg/m3(I), or 1 f/cc (F) 94b. | 43b. | Synthetic Vitreous Fibres (Man Made Mineral Fibres) – Glass wool fibres | 1 f/cc (F) 94c. | 43c. | Synthetic Vitreous Fibres (Man Made Mineral Fibres) – Refractory ceramic fibres | 0.5 f/cc (F) 94d. | 43d. | Synthetic Vitreous Fibres (Man Made Mineral Fibres) – Rock wool fibres | 1 f/cc (F) 94e. | 43e. | Synthetic Vitreous Fibres (Man Made Mineral Fibres) – Slag wool fibres | 1 f/cc (F) 94f. | 43f. | Synthetic Vitreous Fibres (Man Made Mineral Fibres) – Special purpose glass fibres | 1 f/cc (F) 94g. | 43g. | Synthetic Vitreous Fibres (Man Made Mineral Fibres) – Synthetic Vitreous Fibres, not otherwise classified (excluding fibrous glass dust and mineral wool fibre) | 1 f/cc (F)(c) 95. | 99. | Talc [14807-96-6],containing no asbestos | 2 mg/m3(R)(E), or 2 f/cc (K) 96. | 100. | Tellurium hexafluoride, as Te [7783-80-4] | 0.01 ppm, or 0.1 mg/m3 97. | 6. | Tetrachlorophathalic anhydride [117-08-8] | 0.1 mg/m3 98. | 102. | Tetrachlorophenol [25167-83-3] | 0.5 mg/m3 | Skin 99. | 86. | Tetrasodium pyrophosphate [7722-88-5] | 5 mg/m3 100a. | 37a. | Tin, as Sn [7440-31-5] – Metal | 2 mg/m3 100b. | 37b. | Tin, as Sn [7440-31-5] – Oxide and inorganic compounds, as Sn, except tin hydride | 2 mg/m3 100c. | 37c. | Tin, as Sn [7440-31-5] – Organic compounds, as Sn | 0.1 mg/m3 | Skin (organic compounds) 101. | 105. | o-Tolidine [119-93-7] | (L) | Skin 102. | 106. | Triethanolamine [102-71-6] | 0.5 ppm, or 3.1 mg/m3 103. | 107. | Triethylenediamine [280-57-9] | 1 ppm, or 4.6 mg/m3 | Skin 104. | 108. | Triethylenetetramine [112-24-3] | 0.5 ppm, or 3 mg/m3 | Skin 105. | 109. | Trimethoxyvinylsilane [2768-02-7] | 10 ppm, or 60 mg/m3 106. | 75. | Trixylylphosphate [25155-23-1] | 0.1 mg/m3 107. | 20. | *Vinyl chloride [75-01-04] | 1 ppm 108. | 80. | Wheat flour dust (total dust) | 3 mg/m3 109a. | 78a. | Wood dust – Certain hardwoods as beech and oak | 1 mg/m3 109b. | 78b. | Wood dust – Softwood | 5 mg/m3 | 10 mg/m3 Endnotes and Abbreviations: * Denotes a chemical agent listed in Table 1 of Ontario Regulation 490/09 (Designated Substances) made under the Act. See clause 2 (2) (a) of this Regulation. 1 Means the benzene soluble fraction of total particulate matter of the substances emitted into the atmosphere from metallurgical coke ovens including condensed vapours and solid particulates. 2 As sum of components assayed by chromatographic procedure with reference to the bulk sample. [CAS No.] - CAS Registry Number. f/cc - Fibres per cubic centimetre of air. mg/m3- Milligrams of the agent per cubic metre of air. ppm - Parts of the agent per million parts of air by volume. Skin - Danger of cutaneous absorption. (E) The value is for particulate matter containing no asbestos and < 1 per cent crystalline silica. (F) Respirable fibres: length > 5µm; aspect ratio ≥3:1, as determined by the membrane filter method at 400-450 times magnification (4-mm objective), using phase-contrast illumination. (H) Aerosol only. (I) Inhalable fraction: means that size fraction of the airborne particulate deposited anywhere in the respiratory tract and collected during air sampling with a particle size-selective device that, (a) meets the ACGIH particle size-selective sampling criteria for airborne particulate matter; and (b) has the cut point of 100 µm at 50 per cent collection efficiency. (K) Should not exceed 2 mg/m3respirable particulate mass. (L) Exposure by all routes should be carefully controlled to levels as low as possible. (R) Respirable fraction: means that size fraction of the airborne particulate deposited in the gas-exchange region of the respiratory tract and collected during air sampling with a particle size-selective device that, (a) meets the ACGIH particle size-selective sampling criteria for airborne particulate matter; and (b) has the cut point of 4 µm at 50 per cent collection efficiency. (V) Vapour and aerosol. (a) Provided that the total dust contains less than 0.7 per cent vanadium. (b) For assessing the visibility in a work environment where 1,2-propylene glycol aerosol is present. (c) A secondary limit of 5 mg/m3 (total dust) is recommended to deal with dusty operations where fibre counts are usually difficult to determine. Where both types of measurements are made simultaneously, the more restrictive limit should be used to assess the exposures.
Read the CONTROL OF EXPOSURE TO BIOLOGICAL OR CHEMICAL AGENTS on e-Laws ↗

Made under Occupational Health and Safety Act, R.S.O. 1990, c. O.1.