MILK AND MILK PRODUCTS, R.R.O. 1990, Reg. 761
Section 18
Cite as MILK AND MILK PRODUCTS, R.R.O. 1990, Reg. 761, s. 18 · current to November 11, 2026 · consolidated from April 15, 2026 · read from e-Laws on November 16, 2026
The text
(1) Where a gauge rod is used as the measuring device to determine the volume of milk in a farm bulk tank, the gauge rod shall be plainly marked with graduation marks not further then 1 millimetre apart, beginning at the bottom of the rod and continuing only to that level beyond which the milk in the tank cannot be properly agitated without spilling. R.R.O. 1990, Reg. 761, s. 18 (1).
(2) Where a farm bulk tank is designed for the use of a gauge rod, the tank shall be provided with a fixed point for the suspension of the gauge rod. R.R.O. 1990, Reg. 761, s. 18 (2).
(3) Each gauge rod shall be supported in the vertical position at which the farm bulk tank has been calibrated. R.R.O. 1990, Reg. 761, s. 18 (3).
(4) No person shall use a measuring device to determine the volume of milk in a farm bulk tank other than a measuring device that determines the volume of milk within a tolerance of 0.25 per cent. O. Reg. 901/21, s. 8 (1).
(5) Every producer shall maintain near the tank a milk chart, in good condition, for each farm bulk tank. O. Reg. 392/99, s. 4 (1).
(5.1) Each chart must show,
(a) the number of litres for each reading of the measuring device used to determine the volume of milk in the tank; and
(b) the number of whole litres for each graduation of the measuring device. O. Reg. 392/99, s. 4 (1).
(5.2) Every producer shall provide a copy of each chart to the marketing board on the board’s request. O. Reg. 392/99, s. 4 (1).
(6) The readings entered on the chart shall not exceed,
(a) the manufacturer’s rated capacity for the tank; or
(b) the number of litres of milk which can be properly agitated in the tank without spilling. R.R.O. 1990, Reg. 761, s. 18 (6).
(7) No person shall use a measuring device or a chart other than a measuring device or a chart having the same manufacturer’s serial number as the serial number of the farm bulk tank, unless the person has advised the Director of the discrepancy and followed the Director’s directions to address the discrepancy. R.R.O. 1990, Reg. 761, s. 18 (7); O. Reg. 901/21, s. 8 (2).
(8) No person shall alter in any way a measuring device or chart except that the marketing board or the manufacturer of the farm bulk tank may correct or replace an inaccurate chart. O. Reg. 348/95, s. 4.
(9) In the case of milk in a conventional bulk tank, if the bulk tank milk grader cannot sample the milk using a sampling pipette and instead is required to sample the milk using a sanitized long-handled dipper in accordance with subparagraph 1 i of subsection 38 (5), the producer shall provide the bulk tank milk grader with a long-handled dipper and a container filled with sanitizing solution. O. Reg. 901/21, s. 8 (3).
(9.1) Every producer of milk shall post the producer’s licence, with the licence number in a bar code format, so that it is easily accessible to the bulk tank milk grader. O. Reg. 302/04, s. 1 (1).
(10) Every producer of goat’s milk shall mount a dispenser with milk sample labels near the farm bulk tanks in the milk house. O. Reg. 302/04, s. 1 (2).
19.-26. Revoked: O. Reg. 901/21, s. 9.
Read the MILK AND MILK PRODUCTS on e-Laws ↗
Made under Milk Act, R.S.O. 1990, c. M.12.