MILK AND MILK PRODUCTS, R.R.O. 1990, Reg. 761
Section 15
Cite as MILK AND MILK PRODUCTS, R.R.O. 1990, Reg. 761, s. 15 · current to November 11, 2026 · consolidated from April 15, 2026 · read from e-Laws on November 16, 2026
The text
(1) If there is a farm bulk tank on the producer’s premises, the following components of the farm bulk tank shall be enclosed within the milk house:
1. The outlet valve.
2. The personnel access port for grading milk and inspecting the bulk tank and any other components that are necessary to allow access to milk for grading or sampling, including for the aseptic collection of a representative sample.
3. The bulk tank vent.
4. A thermometer that complies with clause 16 (1) (d).
5. All equipment and pipelines that are necessary to wash the inside of the farm bulk tank from within the milk house.
6. All components that are necessary for the purpose of safely and accurately determining the volume of milk in the farm bulk tank from within the milk house. O. Reg. 901/21, s. 6.
(2) Every milk house shall,
(a) be equipped with a properly grounded electrical outlet providing a service of 220 volts and having a capacity of 15 amperes to operate the tank-truck pump;
(b) allow sufficient space for the inspection, cleaning, sanitizing and maintenance of the milk house and the farm bulk tank;
(c) have sufficient room so that a bulk tank milk grader can perform their duties; and
(d) in the case of a farm bulk tank that is not designed to extend through the wall and beyond the perimeter of the milk house, have at least 60 centimetres clear space between the tank and any other farm bulk tank, any wall or any permanent fixture or device. O. Reg. 901/21, s. 6.
(3) Despite clause (2) (a), every electrical outlet shall be of 20 ampere capacity with the on and off switch located in the milk house and a receptacle of a twist-lock design located on the outside of the milk house at a point convenient to the tank-truck operator. O. Reg. 901/21, s. 6.
(4) If there is a conventional bulk tank in the milk house, there shall be sufficient clearance between the top of the conventional bulk tank and the ceiling of the milk house to allow for,
(a) the inspection, sampling, grading and measuring of milk in the conventional bulk tank; and
(b) the complete removal of the internal conventional bulk tank measurement gauge, if one is used to measure the volume of milk in the conventional bulk tank. O. Reg. 901/21, s. 6.
Read the MILK AND MILK PRODUCTS on e-Laws ↗
Made under Milk Act, R.S.O. 1990, c. M.12.