TIRE STANDARDS AND SPECIFICATIONS, R.R.O. 1990, Reg. 625

Section 1

Cite as TIRE STANDARDS AND SPECIFICATIONS, R.R.O. 1990, Reg. 625, s. 1 · current to November 11, 2026 · consolidated from January 25, 2019 · read from e-Laws on November 16, 2026

The text

In this Regulation, “aspect ratio” means the height of the tire section divided by the overall width of the tire, multiplied by 100; (“facteur de forme”) “bead” means the part of a tire that is shaped to fit the rim; (“talon”) “cord” means the strands forming a ply in a tire; (“câblé”) “groove” means the space between two tread ribs; (“rainure”) “Northern Ontario” means the Territorial Districts of Algoma, Cochrane, Kenora, Manitoulin, Nipissing, Parry Sound, Rainy River, Sudbury, Timiskaming and Thunder Bay; (“Nord de l’Ontario”) “ply” means the layer of parallel cords used in forming the tire carcass; (“pli”) “sidewall” means the portion of a tire between the tread and the bead; (“flanc”) “siping” means small, straight, angular or curved slits, other than grooves, molded or cut in the tread surface of a tire; (“lamellisation”) “studded tire” means a tire that has a tread embedded with devices that project beyond the tread and have a hardness of greater than seven on the Mohs scale; (“pneu à crampons”) “tread” means the portion of a tire that comes in contact with the road; (“bande de roulement”) “tread rib” means a tread section running circumferentially around a tire. (“nervure de la bande de roulement”) “TSMI” means the Tire Stud Manufacturing Institute. (“TSMI”) R.R.O. 1990, Reg. 625, s. 1; O. Reg. 617/05, s. 1; O. Reg. 107/06, s. 1.
Read the TIRE STANDARDS AND SPECIFICATIONS on e-Laws ↗

Made under Highway Traffic Act, R.S.O. 1990, c. H.8.